Pro Tool V6.0 SP3 + WINDOWS 10

Hi all,

I have also installed Protool SP3 but this time in Windows 10.

I used an Protool installation CD and select the compatibility mode <Window XP (sevice pack 2)>

The installation work without major problems needed to select ones the OK button.

After installing the program I also selected the compatibility mode <Window XP (sevice pack 2)> for the protool.exe to start the program.

I cannot start up direct from the step 7 project the protool project I need to go the panel sub folder with the protool project data. 

I also test to download the software into OP17 panel and this also work without any problem. 

I needed to change my USB-Serial adapter to COM1. But the rest I could download the project

------------------------------------------------------------------------------------------
Split from Pro Tool V6.0 SP3 + WINDOWS 7.

solved 

steps as attached photos 

SimonHilawefpi

........

I cannot start up direct from the step 7 project the protool project I need to go the panel sub folder with the protool project data. 

...........

------------------------------------------------------------------------------------------
Split from Pro Tool V6.0 SP3 + WINDOWS 7.

 Hello,

From picture No. 5 shared in the previous post, go to file and click on integrate with Step 7 project.

After lof of times installing and uninstalling, what it solved the problem for me. It's to run Step7 as administrator.

I have next:

Win10 64 bit

Step7 V5.6+SP2+HF5

ProTool V6.0 SP3