Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

problem: 802D with ADI4

Created by: zytom at: 3/26/2007 7:30 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

3/26/2007 7:30 PM	Rate (0)
zytom Posts: 3 Rating: (0)	Hello, During commissioning 802D with ADI4, after loading "1_adi4.wpc" and "adi4.ini" I get alarm: "380060 Profibus DP: alarm 1 on logical address 1022 from unused station". Diagnostic guide: check MD 13050[1] - MD 13050[n] n = largest axis index of control system MD 12974, 12975 PLC address range of digital inputs MD 12978, 12979 PLC address range of analog outputs There are no such MD in 802D !!! Please help. Regards, zytom
zytom Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

3/27/2007 9:23 AM	Rate (0)
pfuser Silver Member Joined: 9/18/2006 Last visit: 9/2/2024 Posts: 591 Rating: (64)	It is necessary to activate even one drive. MD 30130=1. MD30240=1. Successes.

Suggestion To thank Quote Answer

3/27/2007 9:19 PM	Rate (0)
zytom Posts: 3 Rating: (0)	hello pfuser now all is ok, thanks Regards, zytom
zytom Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on