Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Problem with faceplates in PCS7 7.1 SP3

Created by: deivitval at: 9/28/2011 12:04 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

9/28/2011 12:04 PM	Rate (0)
deivitval Posts: 29 Rating: (1)	Hello, I have update PCS7 v7.1 SP2to SP3 and now there is a problem with the faceplates. I have configured that froma PIDconL faceplateopen another PIDconL faceplate (with the SelFp1 input). In the blockicon I have configured the format of the each AnalogValue (LMN, SP, PV) with 2 decimal places. With SP2 both faceplates read this configuration and show the numbers correctly but with SP3 the second faceplate shows the numbers without any format. I have created a new project on SP3 and the problem still remains. Somebody know this problem. Thanks,
deivitval Posts: 29 Rating: (1)
Suggestion To thank Quote Answer

9/29/2011 10:12 AM	Rate (0)
Jazz_M Gold Member Joined: 9/6/2008 Last visit: 5/7/2022 Posts: 1121 Rating: (86)	Hi Can you be little more clear, Do you mean to say that you hava PID faceplate 1 and in that you have a button and when you click that you have another PID faceplate opening. Please explain..... Have fun....
	Jazz
Suggestion To thank Quote Answer

9/30/2011 1:10 AM	Rate (0)
Phantom75 Posts: 2661 Rating: (279)	May be the format values in the block icons reverted back to the default values after the upgrade and an OS compile?
Phantom75 Posts: 2661 Rating: (279)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on