Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Problem with HW Config

Created by: irb6 at: 8/26/2008 2:19 PM (25 Replies)

Rating (1)

Thanks 0

Result pages:: |; 1 | 2 | 3; |

26 Entries

Entries per page: 10 | 20 | all

9/5/2008 1:31 AM	Rate (0)
RafaAssun Posts: 9 Rating: (3)	Hi, Did you have STARTER installed on the old PCS7? Becausa if you had, maybe you had used the .GSD provided by it. Regards
RafaAssun Posts: 9 Rating: (3)
Suggestion To thank Quote Answer

9/5/2008 4:28 AM	Rate (0)
DeepakD Bronze Member Joined: 11/30/2006 Last visit: 6/7/2024 Posts: 118 Rating: (11)	First you can try to Save As Your Project with Slow Reorganizationin Simatic Manager. This should resolve your issue . If not try to remove the Read Only Attribute from Root Directory of Project. This should remove the Read only Attribute & then you can try to Update or Reconfigurethe GSDs of Micro Master. When you configure any GSD in your project, GSD will automatically Archved with Project.
	Last edited by: Deeps at: 9/5/2008 4:41 AM
Suggestion To thank Quote Answer

9/5/2008 4:38 PM	Rate (0)
Phantom75 Posts: 2661 Rating: (279)	Deeps ... First you can try to Save As Your Project with Slow Reorganizationin Simatic Manager. ... But Deeps, irb6 has already mentioned that with a save-as reorgthe Micromaster racks get deleted from the HW config!
Phantom75 Posts: 2661 Rating: (279)
Suggestion To thank Quote Answer

9/5/2008 8:09 PM	Rate (0)
Phantom75 Posts: 2661 Rating: (279)	irb6, See if the following thread is useful: Problem installing Drive ES sw Regards, Phantom75
Phantom75 Posts: 2661 Rating: (279)
Suggestion To thank Quote Answer

9/9/2008 12:35 PM	Rate (0)
irb6 Bronze Member Joined: 3/15/2008 Last visit: 9/23/2024 Posts: 106 Rating: (1)	Hi all, Problem is solved. Solution is simple: install only micromaster packadge from Drive ES Basic... When installer "screams" that it is not posssible click yes and so on and after installation there is no more the need Dirve Es /Simotion package by HW Config... Thanks for your all suggestions. Regards
	Best regards Kamil Jastrzębski
Suggestion To thank Quote Answer

7/18/2009 11:11 PM	Rate (0)
alibaba Posts: 90 Rating: (1)	Hello irb6, Did you manage to solve the problem? I'm having the same problem as yours.. Please advise!!
alibaba Posts: 90 Rating: (1)
Suggestion To thank Quote Answer

Result pages:: |; 1 | 2 | 3; |

26 Entries

Entries per page: 10 | 20 | all

|

Share this page:

Share this page on...

Follow us on