Navigation

Protection of Programs on PLC

Created by: e.memarian at: 12/16/2011 5:58 PM (11 Replies)

Rating (2)

Thanks 6

Result pages:: |; 1 | 2; |

12 Entries

Entries per page: 10 | all

12/16/2011 5:58 PM	Rate (0)
e.memarian Posts: 5 Rating: (0)	Hi, These days I'm doing a unique project in a substation. And I don't want to let anyone to get my Programs and configurations. Please show me ways of protecting my programs on PLC.
e.memarian Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

12/16/2011 6:18 PM	Rate (0)
Marcjan Platinum Expert Joined: 4/22/2010 Last visit: 12/15/2022 Posts: 5697 Rating: (709)	Hello, That's hard to tell if we don't know what PLC you have there, S7 200, 1200, 300, 400 ? They all have Password protection in levels variating from read and write, only read, up to no read and write. So let us know what PLC you use and we help. Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

12/16/2011 7:02 PM	Rate (0)
e.memarian Posts: 5 Rating: (0)	Excuse me Marcjan, I'm working on a s7-300 set. My CPU is 315-2DP.
e.memarian Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

12/16/2011 7:35 PM

Rate (1)

hdhosseini

Diamond Expert

Joined: 1/28/2009

Last visit: 11/18/2023

Posts: 6822

Rating:

(1351)

e.memarian
Excuse me Marcjan,
I'm working on a s7-300 set. My CPU is 315-2DP.

Dear e.memarian ,

Check this:

How can you activate the protection level with a password in the HW Config for an S7 CPU?

Description
The table below shows the three different ways of protecting your S7 program against unauthorized access.

Type of access protection

Configuring access protection

Online protection against access to the CPU

The protection level and the input of a password for online access protection is entered in the CPU's object properties in the HW Config.

Encrypted block protection
(STEP 7 V5.5 onwards)

You must install the "S7 Block Privacy" program from the STEP 7 V5.5 DVD before you can configure encrypted block protection. Then you can configure block protection in the SIMATIC Manager by way of "Tools > Block protection...". More information is available in Entry ID: 45632073.
Note
Assigning a password.
The block protection can only be removed again by entering a password.

KNOW_HOW_PROTECT
(STEP 7 V4.0.2 onwards)

A source is generated for the block to be protected. In this source block the keyword "KNOW_HOW_PROTECT" is entered in the declaration part. The block is protected after compiling the source. More information is available in Entry ID: 10025431
Note
Issuing a password is not supported.
The Know-How protection cannot be deactivated without the STL source.

The password protection for the STEP 7 online functions is a protection against access to the CPU.
Using the password protection you can
Protect the user program and data in the CPU against unauthorized changes (write protection).
Protect the know-how contained in your user program (read protection).
Prohibit online functions that would damage the process.

Best regards,

Hamid Hosseini

Last edited by: hdhosseini at: 12/16/2011 7:42 PM

//typo

Demo Channel on Youtube

This contribution was helpful to

1 thankful Users

e.memarian

12/16/2011 7:45 PM	Rate (1)
Marcjan Platinum Expert Joined: 4/22/2010 Last visit: 12/15/2022 Posts: 5697 Rating: (709)	Hello, O.k. a 300, in your hardware config, goto properties of the CPU, tab protection. See attached picture. For more information about the level off protection, press F1, keyword: Password Regards, Marcjan Attachment protection.JPG (567 Downloads)
	Last edited by: Marcjan at: 12/16/2011 7:45 PM Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users e.memarian htet

12/16/2011 7:57 PM	Rate (0)
e.memarian Posts: 5 Rating: (0)	your guidence was helpfull alot. I mean both of u, marjcam and hdhoseini. thanks alot.
e.memarian Posts: 5 Rating: (0)	Last edited by: e.memarian at: 12/16/2011 7:59 PM
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users hdhosseini Marcjan

12/28/2011 4:23 PM	Rate (0)
protivogas Regular Member Joined: 3/14/2009 Last visit: 11/29/2021 Posts: 9 Rating: (0)	e.memarian your guidence was helpfull alot. I mean both of u, marjcam and hdhoseini. thanks alot. Be accurate... For today rescues only Step 5.5 with Block Privacyand CPU with FW V3.0or hight. Other kinds of protection: the password and KHP also can be cracked.

Suggestion To thank Quote Answer

12/28/2011 4:38 PM	Rate (0)
Marcjan Platinum Expert Joined: 4/22/2010 Last visit: 12/15/2022 Posts: 5697 Rating: (709)	Hello, It's know that for every protection, some people find a way to unprotect. For common use the protection Siemens provide is enough. If you want more than that ,build your PLC in a safe and even then you are not sure noone is gonna steal your program. Personaly i only use protection to be sure that people with to little knowledge mess up my systems. Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users poya_xp

12/29/2011 8:48 AM	Rate (0)
Jazz_M Gold Member Joined: 9/6/2008 Last visit: 5/7/2022 Posts: 1121 Rating: (86)	Hi Well i thought the improved Block privacy setting in Step7 V5.5 is only for S7400 system Right, and not for S7300. See this link Have fun...
	Jazz
Suggestion To thank Quote Answer

12/29/2011 9:17 AM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 11/14/2023 Posts: 10222 Rating: (1177)	No, I don't think so. Only for new CPU from v3.2 The problem is that you can't to transfer encrypted FC/FB in old CPUs. best regards, Hristo Mihalev
	Last edited by: UMENCHO at: 12/29/2011 9:20 AM
Suggestion To thank Quote Answer

Share this page:

Share this page on...

Created by: e.memarian at: 12/16/2011 5:58 PM (11 Replies)

Rating (2) Thanks 6

12 Entries

Entries per page: 10 | all

Last edited by: hdhosseini at: 12/16/2011 7:42 PM

This contribution was helpful to

Attachment

Last edited by: Marcjan at: 12/16/2011 7:45 PM

This contribution was helpful to

Last edited by: e.memarian at: 12/16/2011 7:59 PM

This contribution was helpful to

This contribution was helpful to

Last edited by: UMENCHO at: 12/29/2011 9:20 AM

12 Entries

Entries per page: 10 | all

All about SIMATIC S7-300 / S7-300F

Follow us on

Rating (2)

Thanks 6