Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Question about restart PLC

Created by: arecar78 at: 11/12/2012 1:04 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

11/12/2012 1:04 PM	Rate (0)
arecar78 Posts: 24 Rating: (0)	PLC S7-1200 is in STOP mode! Is it possible to put PLC in RUN mode from panel (KTP400 mono)? Does exsist some way to do this? Thanks in advance!
arecar78 Posts: 24 Rating: (0)
Suggestion To thank Quote Answer

12/13/2012 10:10 PM	Rate (0)
maynyrd Posts: 11 Rating: (0)	you can go online with the PLC and go to 'online & diagnostics' under the project tree then under 'cpu operator panel' click run to place it back in run mode. you can configure the PLC to startup in run mode everytime rather than having it go to the last state. that is under 'startup' in the PLC properties.
maynyrd Posts: 11 Rating: (0)
Suggestion To thank Quote Answer

12/14/2012 10:15 AM	Rate (0)
IBN-Service Posts: 8946 Rating: (999)	arecar78 PLC S7-1200 is in STOP mode! Is it possible to put PLC in RUN mode from panel (KTP400 mono)? Does exsist some way to do this? Thanks in advance! No, there is no way. Please read post of maynyrdfor further details.
IBN-Service Posts: 8946 Rating: (999)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Adv System functions/Scripting

Follow us on