Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Recipe nesting WinCC Flexible

Created by: ensa at: 5/13/2008 11:30 AM (5 Replies)

Rating (0)

Thanks 0

6 Entries

5/13/2008 11:30 AM	Rate (0)
ensa Regular Member Joined: 1/25/2008 Last visit: 3/22/2022 Posts: 13 Rating: (0)	I want tonest a recipe in a recipe is this possible? Example: Recipe 1 Recipe 2 tag 1 tag 2 Recipe 3 tag 3 tag 4
	Last edited by: ensa at: 5/13/2008 11:31 AM
Suggestion To thank Quote Answer

5/13/2008 4:09 PM	Rate (0)
ZAK Gold Member Joined: 5/8/2006 Last visit: 2/22/2023 Posts: 1085 Rating: (76)	Hi, it's not possible. Bye
	Last edited by: ZAK at: 5/13/2008 4:09 PM
Suggestion To thank Quote Answer

5/13/2008 4:16 PM	Rate (0)
ensa Regular Member Joined: 1/25/2008 Last visit: 3/22/2022 Posts: 13 Rating: (0)	Thanks for the quick respons, only it was not the answer I hoped for. Is there no work around possible? Greetings, Sep

Suggestion To thank Quote Answer

5/13/2008 4:27 PM	Rate (0)
ZAK Gold Member Joined: 5/8/2006 Last visit: 2/22/2023 Posts: 1085 Rating: (76)	Hi, why do you not use this workaround? Recipe1 tag1 tag2 Recipe2 tag3 tag4 Bye

Suggestion To thank Quote Answer

5/14/2008 8:03 AM	Rate (0)
ensa Regular Member Joined: 1/25/2008 Last visit: 3/22/2022 Posts: 13 Rating: (0)	Hi, I want to store or transfer the Recipe 2 or Recipe 3 sepperate from each other, but also store everything at once. I tried with an event to store Recipe 2 and Recipe 3 after each other in one event. but the second store gave a fault message that the storage already was busy (GetDataRecordFromPLC). Greetings, Sep

Suggestion To thank Quote Answer

5/15/2008 10:52 AM	Rate (0)
The Body Gold Member Joined: 5/13/2008 Last visit: 12/18/2019 Posts: 836 Rating: (69)	Hi, a data transfer via synchronization may fix your issue: - open the help of WinCC flexible and search for 'data mailbox' - follow the 'requirements' in the text - create the"Data record" area pointer - read chapter 2.4.1.8 in the communication manual: http://support.automation.siemens.com/WW/view/en/18797552 - check the structure of the area pointer on page 101 of the manual - create an additional plc-tag with the same adress of the 4th word of this area pointer Your additional tag gets now the same value of the status of the area pointer and can be used by scripting
	mfG / Best regards Roland
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on