Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

s120 line module, Control Interface Module and IPD card

Created by: pedram at: 4/28/2014 2:49 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

4/28/2014 2:49 PM	Rate (0)
pedram Posts: 11 Rating: (0)	Hello every body I have a S120 Line Module If I want to change a Control Interface Module with a new one shouled I download new firmware to it? What is the Control Interface Module replacment procedure? What is the role of IPD card In the converter? Can I replace It without any problem? Thanks
pedram Posts: 11 Rating: (0)
Suggestion To thank Quote Answer

4/28/2014 4:36 PM	Rate (0)
naby62 Posts: 4 Rating: (0)	hi pedram.khobi?.check this out. .https://www.automation.siemens.com/tf/WW/en/Posts/94504
naby62 Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

4/28/2014 6:57 PM	Rate (0)
naby62 Posts: 4 Rating: (0)	parts of control interface board is: 1-adaption interface board 2-power stack adapter 3-AIBO(shunts,limit value monitoring) 4-PSA(generating of inverter pulse pattern) 5-power supply 1 and 2 is parts of communication interface board.
naby62 Posts: 4 Rating: (0)	Last edited by: naby62 at: 5/8/2014 6:43 AM
Suggestion To thank Quote Answer

4/29/2014 6:23 AM	Rate (0)
r.ramezani Posts: 21 Rating: (1)	hi pedram you don't need to download and change the frimware just changing the CIM
r.ramezani Posts: 21 Rating: (1)	Last edited by: r.ramezani at: 4/29/2014 6:28 AM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on