Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S5 Error 900 when using Prommer

Created by: JLSW at: 9/9/2009 2:16 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

9/9/2009 2:16 AM	Rate (0)
JLSW Posts: 2 Rating: (0)	Installed Step5 V7.23 program, using Siematic S5 Authors V4.5 for license key running on Windows XP. But found out that after installed the above, i can only get ST version 7.01. *S5 Error 900 was encountered* using prommer to access EPROM 6ES5-375-1LA41. The message is " The EPROM driver registers an error. Error no. 900 USB prommer locked / not connected." Kindly advise. Thanks Attachment ver.JPG (100 Downloads)
JLSW Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

9/9/2009 9:26 AM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 9/14/2023 Posts: 8592 Rating: (1132)	Dear JLSW, Please check with AuthorsW, which license you have. It looks you have license of Step 5 v7.01 If so, you need an upgrade: http://support.automation.siemens.com/WW/view/en/9860493 Best regards, Wizard

Suggestion To thank Quote Answer

9/9/2009 9:58 AM	Rate (0)
JLSW Posts: 2 Rating: (0)	Dear Wizard, Have upgraded to S5 V7.23 having same license key AuthorsW (V4.5)whichsupport S5/ST version 7.X. Also,installed the a) HotFix, b) SP2, c) Updates for V7.23, and USB_Prommer_CD_2007. Problem still exists communicating with the SiemensParallel Prommer.Found this serial number behind this prommer: C79451-A3449-A11 and VP K5 171328 Plsadvise. Thanks.
JLSW Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on