Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S5 to S7 Conversion problem

Created by: Invincible at: 9/1/2009 10:00 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

9/1/2009 10:00 AM	Rate (0)
Invincible Posts: 4 Rating: (0)	Hi, There, I was trying to convert a S5 project to S7. While compiling the source file in Simatic Manager I found 3 errors. Error Block: CALL FC 151 ( ADRA := 0 , BGAD := 0 , DBNR := B#(0,0) , BEF := lok_kcpar [0] , T_NR := 0 , ANST := M 204.5 , NEUA := M 204.0 , PAFE := M 204.1 , AFEH := M 204.2 , BFEH := M 204.3 , SFEH := M 204.4 , KANR := MB 206 , FMLD := MW 202 ); error 1:No PLC type description found for called address error 2:Invalid operation for ADRA Erro location: AN M 222.5; JC M021; CALL FC 8 BEU; error 3: Syntax error at *BEU.* What Should i do now to solve the errors. Thank you.
Invincible Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

9/7/2009 2:05 PM	Rate (0)
Titas Posts: 94 Rating: (15)	Hello, What is the original programavailable in the step-5 program? Could please update me the I can try about the error message. Regards Titas
Titas Posts: 94 Rating: (15)
Suggestion To thank Quote Answer

9/8/2009 6:28 AM	Rate (0)
Invincible Posts: 4 Rating: (0)	please check the program Thanks Attachment RUN1@@AC.zip (347 Downloads)
Invincible Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on