Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S7-1200 CPU Maintenance LED Continusly ON

Created by: dhinagaran at: 5/16/2014 9:49 AM (9 Replies)

Rating (4)

Thanks 4

10 Entries

5/16/2014 9:49 AM	Rate (0)
dhinagaran Experienced Member Joined: 5/12/2011 Last visit: 3/31/2022 Posts: 78 Rating: (1)	Dear All, I am using S7-1200 1214 CPU And S120 CU320-2P V4.6 in my project. S120 communicating with S7 1200 Through Profinet. After Downloading the program to plc, Maintenance LED of PLC Conitusly ON. RUN LED Also Conitusly ON and drive is working fine and comunicating with plc all operations are OK. The ONLY issue is why the Maintenance LED on?, In cpu diagnostics showing ?? marks on S120 GSD file. and cpu firmware is slao upto date. regards, v. Dhinagaran.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Marithas

5/16/2014 2:13 PM	Rate (0)
VVago Posts: 784 Rating: (52)	dhinagaran.v Dear All, The ONLY issue is why the Maintenance LED on?, In cpu diagnostics showing ?? marks on S120 GSD file. and cpu firmware is slao upto date. regards, v. Dhinagaran. Hello, Check TIA version. Best regards......
VVago Posts: 784 Rating: (52)	Last edited by: Wago at: 5/27/2014 11:43 AM
Suggestion To thank Quote Answer

5/16/2014 3:03 PM	Rate (1)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 11/29/2023 Posts: 13945 Rating: (2277)	dhinagaran.v Dear All, I am using S7-1200 1214 CPU And S120 CU320-2P V4.6 in my project. S120 communicating with S7 1200 Through Profinet. After Downloading the program to plc, Maintenance LED of PLC Conitusly ON. RUN LED Also Conitusly ON and drive is working fine and comunicating with plc all operations are OK. The ONLY issue is why the Maintenance LED on?, In cpu diagnostics showing ?? marks on S120 GSD file. and cpu firmware is slao upto date. regards, v. Dhinagaran. What shows up in your diagnostic buffer and in the project tree while online to help you see what is going on with the RED device(s) in your project? Maybe just simple analog inputs overflowing because they are not jumped to M.
	science guy
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users PDGANGANI

5/26/2014 5:32 PM	Rate (2)
KIRAN_DABHI Posts: 60 Rating: (8)	THIS ERROR ARISES BECAUSE YOUR CPU PART NAME AND VERSION MAY BE LATEST AND IN YOUR TIA PORTAL THAT VERSION NOT AVAILABLE.SO UPDATE YOUR HARDWARE UPDATES IN TIA SOFTWARE.THEN INDENTIFY YOUR CPU BY UNSPECIFY CPU.THEN FURTHER DOWNLOAD HARDWARE. THIS WILL WORK .TRY IT.IF MORE PROBLEM REVET IT.
KIRAN_DABHI Posts: 60 Rating: (8)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Peace4all

5/27/2014 11:30 AM	Rate (0)
Peace4all Posts: 4 Rating: (0)	Had the same LED issue. Thanks a lot. It Works ! 100%
Peace4all Posts: 4 Rating: (0)	Last edited by: peace4all at: 5/27/2014 11:35 AM
Suggestion To thank Quote Answer

10/9/2014 10:32 AM	Rate (0)
don.tnv Bronze Member Joined: 10/29/2007 Last visit: 11/6/2023 Posts: 59 Rating: (1)	Reset to factory setting the Maint LED will OFF.

Suggestion To thank Quote Answer

1/25/2017 6:49 AM	Rate (1)
j.w.eichler Experienced Member Joined: 2/24/2016 Last visit: 10/12/2023 Posts: 32 Rating: (6)	I know this is an old post but the following fixed the maintenance light for me without having to do a factory reset. Do a full software rebuild (right click on CPU, compile>rebuild all blocks). Then download to the CPU. My maintenance LED came on after we had a loose connection to an IO module. cheers.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users ohernandez

7/19/2017 1:26 PM	Rate (0)
NatDen Posts: 1 Rating: (0)	huggy_d1 dhinagaran.v Dear All, I am using S7-1200 1214 CPU And S120 CU320-2P V4.6 in my project. S120 communicating with S7 1200 Through Profinet. After Downloading the program to plc, Maintenance LED of PLC Conitusly ON. RUN LED Also Conitusly ON and drive is working fine and comunicating with plc all operations are OK. The ONLY issue is why the Maintenance LED on?, In cpu diagnostics showing ?? marks on S120 GSD file. and cpu firmware is slao upto date. regards, v. Dhinagaran. What shows up in your diagnostic buffer and in the project tree while online to help you see what is going on with the RED device(s) in your project? Maybe just simple analog inputs overflowing because they are not jumped to M. Hello, What do you mean by "not jumped to M?" Kindly thank you, Nat
NatDen Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

7/19/2017 6:05 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 11/29/2023 Posts: 13945 Rating: (2277)	In multiplexed analog inputs, when the multiplexor isn't pointing at an input, it kind of floats around a bit, floating more when it has not reference - like when an unused input is not jumpered out and wired to DC common (M usually). What you see in those cases when connecting an ANALOG meter (like a Simpson 260 (very old tech, but shows problems most digital meters cannot), is the analog input value starts out high, and quickly runs to 0 --- as the meter shorts out the inputs with the large input impedance. NatDen huggy_d1 dhinagaran.v Dear All, I am using S7-1200 1214 CPU And S120 CU320-2P V4.6 in my project. S120 communicating with S7 1200 Through Profinet. After Downloading the program to plc, Maintenance LED of PLC Conitusly ON. RUN LED Also Conitusly ON and drive is working fine and comunicating with plc all operations are OK. The ONLY issue is why the Maintenance LED on?, In cpu diagnostics showing ?? marks on S120 GSD file. and cpu firmware is slao upto date. regards, v. Dhinagaran. What shows up in your diagnostic buffer and in the project tree while online to help you see what is going on with the RED device(s) in your project? Maybe just simple analog inputs overflowing because they are not jumped to M. Hello, What do you mean by "not jumped to M?" Kindly thank you, Nat
	science guy
Suggestion To thank Quote Answer

11/20/2017 12:42 PM	Rate (0)
Jen_Moderator Moderator Joined: 6/19/2017 Last visit: 11/30/2023 Posts: 7576 Rating: (154)	New question published by vikbar is split to a separate thread with the subject S7-1200 CPU - If it is connected the flashing begins on 3 LEDs. Best regards Jen_Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards Jen_Moderator
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on