Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S7-1500 Accumulator register

Created by: ANSHUMAN_SINGH at: 12/18/2019 6:08 AM (3 Replies)

Rating (2)

Thanks 3

4 Entries

12/18/2019 6:08 AM	Rate (0)
ANSHUMAN_SINGH Experienced Member Joined: 2/9/2016 Last visit: 11/12/2024 Posts: 78 Rating: (0)	Hello, Does S7-1500 & S7-1200 have accumulator register function available only for STL & SCL language ? How can we monitor accumulator or register values as we can do in Simatic manager . Thanks in advance.
	Anshuman Singh
Suggestion To thank Quote Answer

12/18/2019 5:00 PM	Rate (0)
miami Platinum Member Joined: 8/31/2005 Last visit: 11/13/2024 Posts: 2198 Rating: (328)	I assume it's not possible. The manual says nothing about display options: https://support.industry.siemens.com/cs/ww/en/view/109755202/82949072267

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users ANSHUMAN_SINGH

12/19/2019 8:28 AM	Rate (2)
jacek d Platinum Expert Joined: 9/23/2005 Last visit: 11/13/2024 Posts: 4787 Rating: (731)	ANSHUMAN_SINGH Does S7-1500 & S7-1200 have accumulator register function available only for STL & SCL language ? Just to clarify. S7-1200 doesn't have an accumulator register at all. S7-1500 only emulates that it has an accumulator.. And only when you are using the STL.
	Regards, Jacek What is confusing you is the fact that you never see a number but always its digit representation. So you end up thinking that the number is the representation. - Andrej Bauer Any claims against me - based on whatever legal reason - resulting from the use of any code and/or ideas presented on this forum shall be excluded. #StayWithUkraine
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users ANSHUMAN_SINGH SOble

12/19/2019 12:35 PM	Rate (0)
ANSHUMAN_SINGH Experienced Member Joined: 2/9/2016 Last visit: 11/12/2024 Posts: 78 Rating: (0)	jacek d ANSHUMAN_SINGH Does S7-1500 & S7-1200 have accumulator register function available only for STL & SCL language ? Thanks for the feedback. Just to clarify. S7-1200 doesn't have an accumulator register at all. S7-1500 only emulates that it has an accumulator.. And only when you are using the STL.
	Anshuman Singh
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on