S7-400H with ET200M via Profinet IO

Hello,

I use S7-400H and i would lke to communicate with ET200M. That is why in the HWconfig I insere IM153-4 PN v4.0 from the catalog. My question is should I insere the DI & DO from the fourth emplacement or it is correct if I did it from the first one ???

NACHATE

Hello,

I use S7-400H and i would lke to communicate with ET200M. That is why in the HWconfig I insere IM153-4 PN v4.0 from the catalog. My question is should I insere the DI & DO from the fourth emplacement or it is correct if I did it from the first one ???

 Hello, 

If you mean to install the I/O modules from slot number 4, the answer is yes. And for the mentioned IM, you can install modules from slot 4 to slot 15. It can accommodate 12 modules. 

Hope this helps. 

Hello Aymen,

Please take a look to the attachment and told me if this is right !! Thank u.

Hello,

Yes the attached picture of your HW config is correct.

You have to insert modules from Slot 1 to slot 12.

Ok Thank you Aymen for your replay. 

It is very kind of u