Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S7 F SYSTEM

Created by: Rasool S.Alizadeh at: 2/21/2009 3:46 PM (7 Replies)

Rating (3)

Thanks 0

8 Entries

2/21/2009 3:46 PM	Rate (0)
Rasool S.Alizadeh Advanced Member Joined: 9/27/2007 Last visit: 4/11/2024 Posts: 37 Rating: (0)	can any body upload a failsafe project with s7 f system and CFC for sample plaese plaese please

Suggestion To thank Quote Answer

2/22/2009 3:31 AM	Rate (1)
Phantom75 Posts: 2661 Rating: (279)	Hi Rasool, I am not sure what exactly you are looking for... Also, you have not stated which version of PCS7 and which version of F_Lib you have? I made a very elementary F project with PCS7 V7.0 SP1 and F_Lib V1_3. The F password is abc. Let me know ifthis is helpful. Regards Attachment S7f__mp.zip (410 Downloads)
Phantom75 Posts: 2661 Rating: (279)	Last edited by: Phantom75 at: 2/22/2009 4:21 AM
Suggestion To thank Quote Answer

2/22/2009 1:56 PM	Rate (0)
Rasool S.Alizadeh Advanced Member Joined: 9/27/2007 Last visit: 4/11/2024 Posts: 37 Rating: (0)	thank for your answer But can you send me a project with a little logic and real project in small scale with best regards

Suggestion To thank Quote Answer

2/23/2009 5:39 AM	Rate (2)
Phantom75 Posts: 2661 Rating: (279)	My questions from last post still remain. That is, I am not sure what exactly you are looking for... I have added a "Motor" and "Analog Input" in the project and posting same. One of the key differences between an "F project" and standard project is use of F_to_standard and standard_to_F converter blocks... I recommend a little RTFM! Regards Attachment S7f__mp1.zip (306 Downloads)
Phantom75 Posts: 2661 Rating: (279)
Suggestion To thank Quote Answer

2/23/2009 10:22 AM	Rate (0)
CBo Gold Member Joined: 4/5/2006 Last visit: 10/10/2024 Posts: 917 Rating: (63)	Hi Rasool, Failsafe project are a little bit complex, not about logic but for develop platform. As well as Phantom asked is important what you really need: - PCS7 version - S7 F System version - S7 F System library version - Safety Matrix version (optional) This packages needed to be able to open safaty project, if you have you can look online manual installed with PCS7 : "S7 F-FH System - Configuration and programming" (you need also that knoledge to be able to understand and porgrammin failsafe project) Regards

Suggestion To thank Quote Answer

2/23/2009 3:10 PM	Rate (0)
Rasool S.Alizadeh Advanced Member Joined: 9/27/2007 Last visit: 4/11/2024 Posts: 37 Rating: (0)	Hi CBo Yes ,the platfram configuration of failsafe project is complex I want to see a complete project in small scale because I missed time for complete study of manual's thanks for your answer and PCS7 : V7.0 SP1 S7 F SYSTEM V6 SAFETY MATRIX :NO Best Regards Rasool and also thanks with phantom75

Suggestion To thank Quote Answer

5/15/2009 6:52 AM	Rate (0)
decan Posts: 15 Rating: (0)	Dear friend I have Step 7 V 5.4 CFC v7.0 simatic S7 f system 6.0 simatic S7 f system 6.0 lib v1.3 even i had gone through the attached back up(which is wriiren in pcs 7).since i had found conection between CFC to CFC is done. when i am trying to do in my installed version by testual inteconnection,but it is not happened like the attached back up. whether it is possible testual connection between CFC to CFC and in side the chart .if it is, then how to do it.
decan Posts: 15 Rating: (0)	Last edited by: decan at: 5/15/2009 6:53 AM
Suggestion To thank Quote Answer

5/16/2009 7:47 AM	Rate (0)
Phantom75 Posts: 2661 Rating: (279)	decan . . . when i am trying to do in my installed version by testual inteconnection,but it is not happened like the attached back up. whether it is possible testual connection between CFC to CFC and in side the chart. . . Hi decan, Sorry, but I cannot understand your problem... Why do you want to use textual interconnection? And within a chart textual interconnection is meaningless. Can you explain clearer maybe with screenshots etc.? Regards
Phantom75 Posts: 2661 Rating: (279)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on