Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S7 PLC with 6 generator PWM

Created by: JVY at: 9/28/2014 8:21 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

9/28/2014 8:21 PM	Rate (0)
JVY Posts: 1 Rating: (0)	Hello ! Is there a S7PLCwith 6generator PWM ? Thanks
JVY Posts: 1 Rating: (0)	Last edited by: Min_Moderator at: 9/29/2014 3:47 PM New subject after splitting from /tf/WW/en/Posts/101211#top
Suggestion To thank Quote Answer

9/29/2014 3:16 PM	Rate (0)
0_Einstein Diamond Member Joined: 7/7/2010 Last visit: 1/14/2025 Posts: 15533 Rating: (2465)	JVY Hello ! Is there a S7PLCwith 6generator PWM ? Thanks [Not serious but it might make you smile or frown] Sure, it just looks like an s7-1500, or it looks just like two S7-1200's sitting together on the DIN rail. [Serious which will not make you smile] If you have the TIA Portal Software (V13 update 4), drag into a new project the highest S7-1200 you can find. Add in the most digital outputs you can to a signal board. Now enable all of them. If that is not enough, then maybe one of the not so serious suggestions above can help solve the problem. You can also check the s7-1200 system manual for PWM support and choose the options that best fit your needs.
	science guy
Suggestion To thank Quote Answer

9/29/2014 4:58 PM	Rate (0)
miami Platinum Expert Joined: 8/31/2005 Last visit: 11/13/2024 Posts: 2198 Rating: (330)	Have a look at the ET 200S 2-PULSE-Modul. Maybe this is a solution for you.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on