Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Safety Integration

Created by: CNC Chennai at: 10/6/2010 6:12 PM (3 Replies)

Rating (1)

Thanks 1

4 Entries

10/6/2010 6:12 PM	Rate (0)
CNC Chennai Experienced Member Joined: 12/5/2006 Last visit: 5/26/2023 Posts: 177 Rating: (2)	Dear All In our Machine having 840D , We are facing the following Error while doing Brake Test . 20095 Axis Z3 illegal current Torque 62 20095 Axis Z3 illegal current Torque 63 20095 Axis Z3 illegal current Torque 59 Please Guide us how to fix this issue.

Suggestion To thank Quote Answer

10/6/2010 8:25 PM	Rate (0)
Ben Rad Bronze Member Joined: 7/28/2010 Last visit: 8/31/2024 Posts: 184 Rating: (11)	Dharma, Please take a look at the attached file which has the description of the fault. Regards, Behnam CPU315 <-> S120, How????? Attachment 840D-20095 Alarm.pdf (135 Downloads)

Suggestion To thank Quote Answer

10/8/2010 5:42 AM	Rate (0)
CNC Chennai Experienced Member Joined: 12/5/2006 Last visit: 5/26/2023 Posts: 177 Rating: (2)	Mr Behnam I Checked the Parameter MD36966 $MA_SAFE_BRAKETEST_TORQUE it as settted to 65 % . When i increased to 80 % After Power Rest , It is Giving Checksum Error . How to Over come this . Pl Guide

Suggestion To thank Quote Answer

10/10/2010 6:38 AM	Rate (1)
Ekalavya Posts: 2964 Rating: (484)	Hello Dharamalingam, After you have change the machine data you need to go Drive Configuration in that you need to goto>Copy SI data> NCK reset > Confirn SI data > NCK reset Check this out.... Regards, Ekalavya
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users firdaus_1992

|

Share this page:

Share this page on...

Follow us on