Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SAMMS software

Created by: The Keeper at: 2/9/2013 6:07 PM (5 Replies)

Rating (0)

Thanks 0

6 Entries

2/9/2013 6:07 PM	Rate (0)
The Keeper Advanced Member Joined: 4/6/2006 Last visit: 9/13/2024 Posts: 24 Rating: (2)	I am looking for some OLD software and cable pin outs. I know there was some software that allowed you to program the old SAMMS units and I haven't been able to find it anywhere, can someone on the forum help me out. Along with the software I need the pinouts of the connecting cable to allow me to connect the SAMMS unit to the PC. Thanks for the help.

Suggestion To thank Quote Answer

2/9/2013 8:14 PM	Rate (0)
dchartier Grandmaster Joined: 9/27/2006 Last visit: 9/13/2024 Posts: 12282 Rating: (2683)	Hello Keeper; Could you be refering to WinPM software? Description of WinPM, SEABUS ans SAMMS: http://www.eandm.com/eandm/training/siemenscourses/pmma_3.pdf Downloads of WinPM are very difficult to find. Here is the newer version: WinPM.Net: https://w3.usa.siemens.com/powerdistribution/us/en/product-portfolio/power-monitoring/energy-management-software/winpm-net/Pages/winpm-net.aspx?HTTPS=REDIR Legagy equipment on WinPM.Net: https://w3.usa.siemens.com/powerdistribution/us/en/product-portfolio/power-monitoring/application-engineering/Pages/Legacy_4300_4700_4720.aspx?HTTPS=REDIR Hope this helps, DanielChartier

Suggestion To thank Quote Answer

2/9/2013 10:16 PM	Rate (0)
The Keeper Advanced Member Joined: 4/6/2006 Last visit: 9/13/2024 Posts: 24 Rating: (2)	I don't think so, I do have Winpm. According to the SAMMS software manual the software is call SAMMS Siemens Advanced Motor MasterSystem Premium or Standard Software.This came from a copy of the software manual that I found online, I just can't find the software. It allows you to setup the SAMMS unit. The hand held unit doesn't fully program them. Thanks for the help, any other ideas?

Suggestion To thank Quote Answer

2/9/2013 10:20 PM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 9/10/2024 Posts: 10228 Rating: (1181)	Are you sure that the software exited somewhere like a tool for programing? Did you see it?
	Last edited by: UMENCHO at: 2/9/2013 10:20 PM
Suggestion To thank Quote Answer

2/9/2013 10:35 PM	Rate (0)
The Keeper Advanced Member Joined: 4/6/2006 Last visit: 9/13/2024 Posts: 24 Rating: (2)	No, I have never seen it, just heard about it, and have seen the manual, whichI haveattached the manual to this thread,I hope. Attachment C:\Documents and Settings\corejm\My Documents\SAMS units\SAMMS_Software_Manual.pdf (173 Downloads)

Suggestion To thank Quote Answer

2/9/2013 11:15 PM	Rate (0)
dchartier Grandmaster Joined: 9/27/2006 Last visit: 9/13/2024 Posts: 12282 Rating: (2683)	Hello Keeper, Sorry, no, I have no more ideas. The only thing I can think of is contacting Siemens Power DistributionUSA: https://w3.usa.siemens.com/powerdistribution/us/en/product-portfolio/power-monitoring/application-engineering/Pages/Legacy_4300_4700_4720.aspx?HTTPS=REDIR They offer migration of legacy equipment such as SAMMS to their newer software platforms, they may still have access to that orignial software in their archives. Hope this helps, Daniel Chartier
	Last edited by: dchartier at: 2/9/2013 11:16 PM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on