Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SIMATIC MP 377 Damaged Screen (No display)

Created by: Claym18sa at: 12/1/2022 2:49 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

12/1/2022 2:49 AM	Rate (0)
Claym18sa Joined: 11/20/2022 Last visit: 12/1/2022 Posts: 1 Rating: (0)	Good day, We have faulty Screen (SIMATIC MP 377) , We are about to replace With a new SIMATIC MP 377 device. but we are not sure about the replacement procedures if we gonna lose the program settings etc... So we seek your assistance about the stepes we have to do to install the new device without losing the program settings. Best regards

Suggestion To thank Quote Answer

12/1/2022 7:54 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 1/27/2023 Posts: 8584 Rating: (1122)	Hello, Use Prosave to make backup. See this link: How do you backup/restore with a Windows-based panel? Best regards, Wizard

Suggestion To thank Quote Answer

12/9/2022 10:47 AM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 1/26/2023 Posts: 9646 Rating: (1297)	Hello Claym18sa If your defect MP377 do not work any more and you cannot boot the panel then a Backup of the dta on this panel is not possible. Then you would need the project (Wincc flexible oder TIA) to load the new panel wih the Runtime project. If the damaged panel still runs then a Backup/Restore is your way. Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on