Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SIMOCODE ES tool

Created by: ice_engg at: 6/17/2009 9:17 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

6/17/2009 9:17 AM	Rate (0)
ice_engg Posts: 5 Rating: (0)	I have below problem in opening the SIMOCODE slaves using SIMOCODE ES tool. SIMOCODE are configures as DP slave under 4 DP Master System in S7-400 system.When I go online from SIMOCODE ES software, through open onlineà Simatic Networkà 2.Step7 Project (desired project selected)à 3.DP master system (desired DP master system is selected).When Master System 1 is selected, I get list of DP slaves connected in another master system.Is this is a software bug to be fixed with some hot fixes or am I missing some configuration settings? Thanks
ice_engg Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

6/17/2009 1:16 PM	Rate (0)
LesPaul Posts: 467 Rating: (59)	hello ice_engg, is it made sure that the Simocodedevicesare projected in the respectively accompanying s7-400? If you like, please send the HW-config file to technical-assistance@siemens.com tocheck the configuration
LesPaul Posts: 467 Rating: (59)
Suggestion To thank Quote Answer

6/17/2009 1:38 PM	Rate (0)
ice_engg Posts: 5 Rating: (0)	Thanks. I have send the configuration to siemens tech support and I am posting over here too. Attachment hw_simoes.zip (455 Downloads)
ice_engg Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on