Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SIMOTION with SINAMICS G120 - Sample Program

Created by: Navnag at: 10/15/2014 7:23 AM (2 Replies)

Rating (0)

Thanks 1

3 Entries

10/15/2014 7:23 AM	Rate (0)
Navnag Platinum Member Joined: 11/21/2007 Last visit: 9/25/2024 Posts: 2325 Rating: (308)	Hello friends Is there a sample program available for controlling SINAMICS G120 over PROFIBUS / PROFINET from SIMOTION D410-2 ? The G120 is being used for some conveyor drives for VVVF Speed control only. These do not need to be defined as Axis. Thanks Navnag
	There is no such thing as the last bug in a program There are no stubborn bugs, There are only stubborn Debuggers.
Suggestion To thank Quote Answer

10/15/2014 2:27 PM	Rate (0)
A.Gabardo Posts: 87 Rating: (7)	Hi Navnag. As far as I know there is no a sample project, but you can work like a conventional PLC, working directly with the IOs periphery. Simotion side: In the hardware config you will select the G120 and configures the Telegram for communication, for example the 'Standard message frame 1, PZD-2/2'. Then a address will be created. Sinamics G120 side: In the parameter 'p922' you must configure the same Telegram that was configured in the hardware config. For example: 'Standard message frame 1, PZD-2/2' := PZD1 -> STW1 (Ctrl Word); //Simotion to Sinamics G120 PZD2 -> NSOLL_A (Main Setpoint); // PZD1 -> ZSW1 (Stw Word); //Sinamics to Simotion PZD2 -> NIST_A (Actual Speed); // Hope this helps. Regards
A.Gabardo Posts: 87 Rating: (7)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Navnag

10/15/2014 7:57 PM	Rate (0)
Navnag Platinum Member Joined: 11/21/2007 Last visit: 9/25/2024 Posts: 2325 Rating: (308)	Thanks A.Gabardo I am doing it as you suggested. I just wanted to avoid re-inventing the wheel, in case a tested sample was available. Cheers Navnag
	There is no such thing as the last bug in a program There are no stubborn bugs, There are only stubborn Debuggers.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on