Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

simulating from wincc

Created by: Insausti at: 10/26/2006 10:54 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

10/26/2006 10:54 AM	Rate (0)
Insausti Posts: 150 Rating: (2)	i'm trying out a small example, setting and resting output, input and memory bits from a WinCC screen in runtime. For example, when i press a button an output in the PLC should light, but this is working so far with the PLC outputs, but not with the inputs and memory bits. The CPU i'm using is 314C-2 DP, could this be the problem???
Insausti Posts: 150 Rating: (2)
Suggestion To thank

10/26/2006 9:57 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 11/18/2024 Posts: 4113 Rating: (195)	Closed: cause thread was posted twice. The other thread you can find here: project simulating.
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on