Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Simulation on VmWare

Created by: Fabio068 at: 7/1/2010 12:20 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

7/1/2010 12:20 PM	Rate (0)
Fabio068 Bronze Member Joined: 7/16/2008 Last visit: 3/16/2023 Posts: 82 Rating: (1)	I have problem simulatingFlexible 2008 SP2 and PLCSIM5.4 SP3. I'm using VMWare 7.1 with XP SP2 installed because my PC new has W7 64bit. When I start runtime of Flexible, after few minute, PC freeze for a long period of time. I found in windows events related to MSSQL$WINCCFLEXa lot of this messages "server resumed execution after being idle XXX seconds : user activity awakened the server. Any idea or experience related this problem? Thank you

Suggestion To thank Quote Answer

7/1/2010 12:37 PM	Rate (0)
Sandman Platinum Member Joined: 4/29/2010 Last visit: 12/16/2022 Posts: 1557 Rating: (160)	Hello, flexible 2008 SP2 isn`t released for WinXP SP2. Have you allready installed the last windows updates at your winXP? best regards

Suggestion To thank Quote Answer

7/1/2010 1:47 PM	Rate (0)
Fabio068 Bronze Member Joined: 7/16/2008 Last visit: 3/16/2023 Posts: 82 Rating: (1)	Hi Sandman Thanks for replay I update my windows this morning with lates correction from microsoft.

Suggestion To thank Quote Answer

7/1/2010 1:50 PM	Rate (0)
Fabio068 Bronze Member Joined: 7/16/2008 Last visit: 3/16/2023 Posts: 82 Rating: (1)	I done another test I run just winCCflexible without PLCSIM for more than 1hour without probleml. Look like if problem appear with two software running togheter.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on