Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Sinamic S and SMC 10

Created by: arta_wahyu at: 10/24/2014 2:14 AM (13 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2; |

14 Entries

Entries per page: 10 | all

10/25/2014 7:58 AM	Rate (0)
arta_wahyu Posts: 30 Rating: (0)	thank you for your answer dear.. so what must I do to solve the fault dear? Thank you
arta_wahyu Posts: 30 Rating: (0)
Suggestion To thank Quote Answer

10/25/2014 7:59 AM	Rate (0)
arta_wahyu Posts: 30 Rating: (0)	Can you show me the right wiring dear? Thank you Best Regards Arta Wahyu
arta_wahyu Posts: 30 Rating: (0)
Suggestion To thank Quote Answer

10/25/2014 8:15 AM	Rate (0)
arta_wahyu Posts: 30 Rating: (0)	Maybe you have suggest to me to solve that problem dear Thank you Best Regards Arta Wahyu
arta_wahyu Posts: 30 Rating: (0)
Suggestion To thank Quote Answer

10/25/2014 8:45 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 6/5/2023 Posts: 21509 Rating: (2854)	Hello, go online with your project open the topology Make a screenshot of the online view of the topology here! The other problems: Switch ON inhibit -> this error occurs because you have the wrong SMC module wire Operation signal -> here normaly the operation bit from the line Modul ist connected You say you have no Line module, not a really good idea, so here you must connnect the digitial input from the control unit which is connected with the Ready Signel from you DC supply. Regards Christoph

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on