Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Sinamics Drive Parameterization

Created by: Tech Ahmed at: 4/18/2012 8:35 AM (5 Replies)

Rating (2)

Thanks 2

6 Entries

4/18/2012 8:35 AM	Rate (0)
Tech Ahmed Advanced Member Joined: 1/16/2012 Last visit: 10/30/2024 Posts: 114 Rating: (2)	Dear Experts, Your help is required, regarding the parameterization of sinamics drives. Our plant is equipped with several sinamics drives and wehave uploaded the all drives backups on laptop through Driver Es - Starter V4.2 software. Last week one drive tripped with alarm "F30106 PU: Actual_Sens Offset err" I checked the manual book, this alarm was belong to parameter No: P6950 LAPTOP (with STARTER): I connect the laptop with drive and online try to find the parameter in the expert list but this parameterwas not available in the parameter list. DRIVE OPERATOR PANEL: I checked on the drive operator panel, itwas also not available, but by access the service level (after entering the password) I can see this parameter setting. It means all parameters which are related to service level are not uploaded though STARTER software and the backups which we have are not useful to download again. How I can uploadcomplete parameters of the drives through STARTER software.

Suggestion To thank Quote Answer

4/18/2012 9:20 AM	Rate (1)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/7/2024 Posts: 22439 Rating: (3029)	Hello, check the Service Level in the Project ! When you open the expertlist you have in the toolbar a key symbol, click it set the Servicelevel and enter the password, now you see the hidden parameters of the servicelevel in the expertlist. Regards Christoph

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Tech Ahmed

4/20/2012 11:25 AM	Rate (1)
Ajay Gupta Posts: 58 Rating: (19)	Dear Nisar, The backups taken by you can always be downloaded without any harm. It is just the case that you wont be able to see these hidden parameters when the drive is offline. To be able to see all the parameters please enter the password (which you already know) and then upload the drive object. You will be able to see this parameter now even in the offline mode (maybe again you will have to set the access mode to service in offline mode too) Have a nice day Regards Ajay Gupta
Ajay Gupta Posts: 58 Rating: (19)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Tech Ahmed

4/21/2012 9:09 AM	Rate (0)
Tech Ahmed Advanced Member Joined: 1/16/2012 Last visit: 10/30/2024 Posts: 114 Rating: (2)	Dear Mr. Christoph & Mr. Ajay Gupta, Thanks for guidance. Have a nice day
	Last edited by: Nisar Ahmed at: 4/21/2012 9:23 AM
Suggestion To thank Quote Answer

9/13/2017 9:46 PM	Rate (0)
amre Posts: 7 Rating: (0)	Can you tell me what was the solution of this problem, we we have the same problem now
amre Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

12/18/2017 11:02 AM	Rate (0)
Jen_Moderator Diamond Member Joined: 6/19/2017 Last visit: 9/6/2024 Posts: 8175 Rating: (172)	New question published by Chatterjee is split to a separate thread with the subject Machine not getting started after changing Parameter no. P10 to 1 from 0 . Best regards Jen_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on