Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SINUMERIK HMI Configuring Software

Created by: JaToLe at: 11/3/2010 11:31 PM (3 Replies)

Rating (0)

Thanks 1

4 Entries

11/3/2010 11:31 PM	Rate (0)
JaToLe Posts: 11 Rating: (0)	Hi all! I have WCF 2005 with SINUMERIK HMI Configuring Software V1.1 SP1 (version 01.01.01.00). Does anyone know where I can find an upgrade to V1.1 SP1 HF5 (version 01.01.01.05)? I also need V1.3 SP2 (version 01.03.02.00) for a colleague who has WCF 2008. Is any of the above available as free download? I've found it hard to search for, maybe because WCF itself is often called "configuring software", so I hope you forum fellas can help me.
JaToLe Posts: 11 Rating: (0)
Suggestion To thank Quote Answer

11/4/2010 8:39 AM	Rate (0)
Sandman Platinum Member Joined: 4/29/2010 Last visit: 3/30/2023 Posts: 1557 Rating: (161)	Hello, i also haven`t found something at the support sites. Maybe it is the best if you open a service request at the Sinumerik hotline: http://support.automation.siemens.com/WW/view/en/38716036 best regards.

Suggestion To thank Quote Answer

11/4/2010 11:14 PM	Rate (0)
JaToLe Posts: 11 Rating: (0)	Some additional info: WCF = WinCC Flexible Compatibility list ofdifferent versions ofengineering package attached. Just a last try before I follow your advice, Sandman... Attachment HMI_Projpaket_WinCC_00_76_100622.pdf (68 Downloads)
JaToLe Posts: 11 Rating: (0)
Suggestion To thank Quote Answer

12/16/2010 9:38 AM	Rate (0)
JaToLe Posts: 11 Rating: (0)	Just to share the end of the story: I opened a service request and got good help. It turned out the configuration packages were not availableas freedownloads.
JaToLe Posts: 11 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users O_Moderator

|

Share this page:

Share this page on...

Follow us on