Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SIPART DR2210

Created by: bocatadeatun at: 3/15/2007 6:05 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

3/15/2007 6:05 PM	Rate (0)
bocatadeatun Bronze Member Joined: 10/18/2006 Last visit: 7/29/2024 Posts: 163 Rating: (3)	Hi gurus, I havetried tointegrate a SIPART DR 2210 in a PCS7 v6.1 SP1 project. This instrument is hanging on PROFIBUS DP line which has also two DP / PA links with their respective PA lines. There´s also a CiR object In the DP line as well as inboth PA lines. In order to configurate it properly,I set the option "S7 compatible" in the CP Profibus card (in the HW Config). This way it worked perfectly butwe had toremovethe CiR objects in order to be able to transfer the HW. My question then is: Is it possible to configure this SIPART with this so calledconfiguration keeping the CiR objects ? Or maybe the only way to solve this is to create a separate DP line for the SIPART (hangingdown theCPU) and a different DP line with the two DP / PA links and the two PA lines (hangingdown the CP) ?? Thank u very much in advance for your response, Ciao Attachment 5 - HARD ONLINE.JPG (776 Downloads)

Suggestion To thank Quote Answer

3/18/2007 10:15 AM	Rate (0)
SonicRanger Posts: 151 Rating: (8)	Hi bocatadeatun, although there are some Sipart topics in this part of the forum, I think your questioncan better be answered by the experts inthe decentral peripherie or PCS7 forum. Regards, Sonic Ranger.
SonicRanger Posts: 151 Rating: (8)
Suggestion To thank Quote Answer

3/19/2007 8:46 AM	Rate (0)
bocatadeatun Bronze Member Joined: 10/18/2006 Last visit: 7/29/2024 Posts: 163 Rating: (3)	Ok, thanks SonicRanger, I will follow your advise. Regards

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SIPART

Follow us on