Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Siwarex CS Module not calibrated

Created by: DaWWa at: 1/27/2016 12:42 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

1/27/2016 12:42 PM	Rate (0)
DaWWa Advanced Member Joined: 9/11/2008 Last visit: 12/3/2024 Posts: 29 Rating: (0)	Hi All I have 1 loadcell connected to the Siwarex unit. The calibration is done from my HMI, and the value from the scale is working/displaying just fine. Problem is that the statusword: DS 30 – Scale Status bit 7 =1 Module not calibrated still the scale is working fine. Any suggestions how to clear this status bit?.

Suggestion To thank Quote Answer

2/8/2016 9:59 AM	Rate (0)
Siwarexi Gold Expert Joined: 1/4/2007 Last visit: 12/17/2024 Posts: 1166 Rating: (175)	Hello DaWWa, DS 30 – Scale Status bit 7 means: 1 Module calibrated. See also the manual, chapter 5.7.1.: https://support.industry.siemens.com/cs/ww/en/view/29490976 It is normal, that this flag is permanent TRUE after a calibration. Best regards Siwarexi

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on