Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Step 5 / IP262 / HELP

Created by: Snemeis337 at: 3/29/2007 7:37 PM (6 Replies)

Rating (1)

Thanks 0

7 Entries

3/29/2007 7:37 PM	Rate (0)
Snemeis337 Posts: 3 Rating: (0)	Attached is a Step 5 program. Part of that program controls 3 temperature zones on a machine, with thermocouple inputs and IP-262 closed loop control module. I am familiar with Step 5 but not so much with IP-262. Could someone take a few minutes to look at this program to define what DBs are used for the IP-262, and to give me some direction. I have the IP-262 manual but can't identify these for certain. I am adding 4 additional temperature zones to the machine....so I will need to "duplicate" some data areas and code. Sorry...I don't have any symbols. Many Thanks!!!! Attachment 3zhmacst.zip (429 Downloads)
Snemeis337 Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

4/1/2007 2:24 PM	Rate (0)
Late Platinum Expert Joined: 1/7/2006 Last visit: 11/17/2023 Posts: 2705 Rating: (318)	Hi, When I have some time, I will look for you, I already have downloaded the program.. but on the PC I now working on, I have no STEP5.
	I hope that the answer will help, if you have still questions, don't hesitate to ask me. All the best, Late Never say never, think in solutions, not in trouble......
Suggestion To thank Quote Answer

4/1/2007 5:59 PM	Rate (1)
Late Platinum Expert Joined: 1/7/2006 Last visit: 11/17/2023 Posts: 2705 Rating: (318)	Hi, FB61 is for the IP262, this block is called from PB3 network 5, 6 and 7 with DB50, DB60 and DB70 PB3 is called from OB1 network 9.
	I hope that the answer will help, if you have still questions, don't hesitate to ask me. All the best, Late Never say never, think in solutions, not in trouble......
Suggestion To thank Quote Answer

4/4/2007 3:38 PM	Rate (0)
Snemeis337 Posts: 3 Rating: (0)	Thanks...but what is the purpose of FB62 and where is the information telling which slot the module is in? DW? in DB? ? Thanks again!
Snemeis337 Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

4/5/2007 12:13 AM	Rate (0)
Late Platinum Expert Joined: 1/7/2006 Last visit: 11/17/2023 Posts: 2705 Rating: (318)	Hi, FB62 is to get the parameters to the right PID and to read out the values. I have not seen the handbook for a long time (1996) but this block would be described there.
	I hope that the answer will help, if you have still questions, don't hesitate to ask me. All the best, Late Never say never, think in solutions, not in trouble......
Suggestion To thank Quote Answer

6/7/2007 1:37 AM	Rate (0)
Epero Posts: 9 Rating: (0)	Hi:: You can find the IP 262 manual on the Inteligen modules for S5 95, and S5 100. https://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csinfo&lang=en&siteid=cseus&objid=11118854 Best regards.
Epero Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

6/7/2007 8:52 PM	Rate (0)
Late Platinum Expert Joined: 1/7/2006 Last visit: 11/17/2023 Posts: 2705 Rating: (318)	Hello Epero, When you using copy link on left under where you find a handbook then the link is some better.
	I hope that the answer will help, if you have still questions, don't hesitate to ask me. All the best, Late Never say never, think in solutions, not in trouble......
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on