Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Step 7 Datablock Export

Created by: jackr at: 9/1/2006 5:00 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

9/1/2006 5:00 PM	Rate (0)
jackr Posts: 17 Rating: (0)	Hi, I posted a similar question in the WinCC area to address the problem from that direction, but I would like to see if there is any easy way to address it from Step 7. Does anybody know of a easy way to export datablock symbols and addresses to a CSV file so it can be imported into WinCC 6.0? We have a application that is setup for an Allen-Bradley processor and would now like to integrate a second Siemens processor. Since we are an OEM and need to implement whatever PLC version the customer requires, we need a stand-alone WinCC application, so we cannot make use of the "Totally Integrated" options that would normally be used in thiscase to put the WinCC and PLC program in the same file under Simatic Manager. Thanks. jack
jackr Posts: 17 Rating: (0)
Suggestion To thank Quote Answer

9/3/2006 3:48 PM	Rate (0)
Late Platinum Expert Joined: 1/7/2006 Last visit: 7/3/2023 Posts: 2705 Rating: (314)	Hi Jack, See the document I special made for you in the other question. Attachment Work with Sources.pdf (447 Downloads)
	I hope that the answer will help, if you have still questions, don't hesitate to ask me. All the best, Late Never say never, think in solutions, not in trouble......
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on