Navigation

Step7 + CFC Module Driver generation problem

Created by: sinhx at: 9/9/2018 8:27 AM (1 Replies)

9/9/2018 8:27 AM	Rate (0)
sinhx Regular Member Joined: 1/12/2012 Last visit: 5/24/2023 Posts: 34 Rating: (0)	Dear Experts, I am facing problem while trying to generate module drivers. Project contains multiple CPU 417-5H with distributed RIOs having several regular SMs and Failsafe SMs and developed using Step 7 with CFC integration. Initially some module drivers were generated (I don't know how by the development team ), but now I facing the same problem while trying to generate module driver. Installed Simatic softwares and error screens are attached herein with this post. Please help. sinh(x) Attachment ModDrvErr.zip (30 Downloads)
	Regards, sinhx
Suggestion To thank Quote Answer

9/11/2018 9:59 PM	Rate (0)
hdhosseini Diamond Expert Joined: 1/28/2009 Last visit: 5/26/2023 Posts: 6802 Rating: (1345)	Hello, First you need to know which software packages are used to develop your Automation systems.You will find out the procedure in the following video.The next step, try to have a PG compatible with the original configuration.Also check that this is not an installation problem. I hope it helps, hdhosseini
	Last edited by: hdhosseini at: 9/11/2018 10:12:58 PM Demo Channel on Youtube
Suggestion To thank Quote Answer