Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Synchron Axes for milling machine

Created by: Burumdurum at: 5/29/2008 2:19 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

5/29/2008 2:19 PM	Rate (0)
Burumdurum Posts: 31 Rating: (0)	Hello everybody, In my projekt i need to control milling machine. I have two synchron engines to move half-finished product. And i need them to move it in that way, that cutting mechanism could cut a cirсle. I wonder if anybody know how it can be done? Could it be done just in a programm way(and what is then a general algorithm?) or it is possible to give them a certain trajectory? Thank you very much, Tanya
Burumdurum Posts: 31 Rating: (0)
Suggestion To thank Quote Answer

6/6/2008 5:01 PM	Rate (0)
ThomasD Posts: 39 Rating: (9)	Hello Tanya In principle you can realize such applications in Simotion with the camming or path functions. These functions are described in the documents „Gear_TechnologyFct.pdf “and „Path_TechnologyFct.pdf “(CD_10\Documentation\English\2_Description_of_system_and_functions). In order to find the best solution, one must know the application exactly. Therefore you should look for contact to the hotline with a specification of your application. Regards ThomasD
ThomasD Posts: 39 Rating: (9)
Suggestion To thank Quote Answer

6/9/2008 10:20 AM	Rate (0)
Burumdurum Posts: 31 Rating: (0)	Thank you foe your answer! But i dindt understood where i can get this pdf file...I mean i have no CD.. Sorry, im a newcommer here.. Bestr regards, Tatiana
Burumdurum Posts: 31 Rating: (0)
Suggestion To thank Quote Answer

6/9/2008 6:11 PM	Rate (0)
ThomasD Posts: 39 Rating: (9)	Hello Tatiana You can find the documents also by following links: http://support.automation.siemens.com/WW/view/en/28016915 (path functions) http://support.automation.siemens.com/WW/view/en/28017268 (camming functions) Regards ThomasD
ThomasD Posts: 39 Rating: (9)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on