Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

System Error on downloading charts

Created by: hahaha at: 5/18/2010 3:49 AM (11 Replies)

Rating (0)

Thanks 2

Result pages:: |; 1 | 2; |

12 Entries

Entries per page: 10 | all

5/18/2010 3:49 AM	Rate (0)
hahaha Posts: 3 Rating: (0)	JSMTek Hello! I have been playing around a bit.. And I cant remember exactly what I did to make this happen. I believe this started when I put an ALARM_8P block in a CFC chart. But now, everytime i try to complile and download, during download, i get an error saying: Message 0x0. No text in resource DLL "s7jcomfb.dll" available. Does anyone know how I can fix this? Attached screenshots. Have you guys solved this problem? I faced to same situation. When I try to download CFC, I have this enclosed message. How could I solve this problem? Splitted from System Error on downloading charts, What have I done?!. Attachment cfc downlad error.JPG (217 Downloads)
hahaha Posts: 3 Rating: (0)	Last edited by: O_Moderator at: 10/11/2010 9:29 AM new subject after splitting
Suggestion To thank Quote Answer

5/18/2010 1:17 PM	Rate (0)
Bilao Posts: 378 Rating: (47)	Hello hahaha, did you try all the suggestions given here in the thread? One more thing. When does the firstmessage appear? Best regards Bilao
Bilao Posts: 378 Rating: (47)	Last edited by: bilao at: 5/18/2010 1:19 PM
Suggestion To thank Quote Answer

6/20/2010 8:18 AM	Rate (0)
farhang Posts: 6 Rating: (0)	Never never connect any cool disk to your systems.( if you format the cool disk too, viruses may be exist) this is my experience. be sure your problem caused from virus( sality.nar virus). connect your HDD to a clean PC and scan it with updated NOD32 v4.
farhang Posts: 6 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Phantom75

6/28/2010 6:53 AM	Rate (0)
ChessMaster Posts: 84 Rating: (1)	Dear every body I think the problem related to Iran embargo, because you can see many people in Iran have the same problem fromat least1mount ago. It seems it is kind of virus only for Iran.... We have the same problem in our company and all PC in network are infected. We try to resolve this problem by specialist computer programmer. Also there is a problem with Step 7 , when you want to download driver in CP341 for modbus communication. In infected PC you have SD200 error, and you can not download driver to CP341. In PCS7 as Behrooz mentioned you can not download charts into real PLC and Simulator. In fresh computer with new PCS7 installation everything is good, you can create a project and you can download charts to PLC, but when you open a project that has been archived in infected PC, your fresh computer will be infected you even you can not download charts from new project to the PLC.
ChessMaster Posts: 84 Rating: (1)	Last edited by: ChessMaster at: 6/28/2010 7:04 AM Last edited by: ChessMaster at: 6/28/2010 7:02 AM
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users farhang_sh

6/28/2010 11:49 PM	Rate (0)
Phantom75 Posts: 2661 Rating: (279)	ChessMaster . . . I think the problem related to Iran embargo, because you can see many people in Iran have the same problem fromat least1mount ago. It seems it is kind of virus only for Iran... . . . An interesting hypothesis!
Phantom75 Posts: 2661 Rating: (279)
Suggestion To thank Quote Answer

7/4/2010 8:52 AM	Rate (0)
farhang_sh Posts: 10 Rating: (0)	I think the problem related to Iran embargo, because you can see many people in Iran have the same problem fromat least1mount ago. It seems it is kind of virus only for Iran.... maybe this be true. but i solved this problem by a trick.
farhang_sh Posts: 10 Rating: (0)	Last edited by: farhang_sh at: 7/5/2010 6:26 AM Last edited by: farhang_sh at: 7/4/2010 8:54 AM
Suggestion To thank Quote Answer

7/4/2010 12:56 PM	Rate (0)
Behrooz Posts: 30 Rating: (0)	Dear Farhang_sh Please let us have your procedure....
Behrooz Posts: 30 Rating: (0)
Suggestion To thank Quote Answer

7/4/2010 2:57 PM	Rate (0)
Yer Posts: 86 Rating: (7)	hI, do you usea encripted flash drive, I have encouter a problem with Truecript in combination with a flash drive. Yer
Yer Posts: 86 Rating: (7)
Suggestion To thank Quote Answer

7/6/2010 5:13 PM	Rate (0)
farhang_sh Posts: 10 Rating: (0)	I changed all HDDs and reinstall PCS7 again. system worked well for One week but the Error message appeared again. this is a strange problem. Please helppppp. lot of companies have this problem( since one month ago). why siemens doesnt help? Please if you can, inform siemens experts for solving this problem.
farhang_sh Posts: 10 Rating: (0)	Last edited by: farhang_sh at: 7/6/2010 5:16 PM Last edited by: farhang_sh at: 7/6/2010 5:16 PM
Suggestion To thank Quote Answer

10/6/2010 10:22 AM	Rate (0)
aseame Posts: 1 Rating: (0)	farhang_sh I changed all HDDs and reinstall PCS7 again. system worked well for One week but the Error message appeared again. this is a strange problem. Please helppppp. lot of companies have this problem( since one month ago). why siemens doesnt help? Please if you can, inform siemens experts for solving this problem. All of these problems seem to be down to the Stuxnet virus which has been written to target the PCS7 system specifically (see http://www.symantec.com/connect/blogs/exploring-stuxnet-s-plc-infection-process). I work for Siemens using the PCS7 software to program S7-400 PLC's for Gas Turbine Control and we discovered yesterday that at least 5 computers out of a department of 8 people all have this virus, so Siemens are just as vulnerable as anyone else. I find it difficult to accept that someone has written a virus that targets PCS7 and now somehow it is Siemens' fault! Hopefully, if you follow the link to Symantec's website, above, you should be able to remove the virus, but you may need to buy Norton, if you don't alreeady have it. Etiher way, you should have some sort of quality anti-virus software on your computer which should be able to sort your problem, but it is good practise to have one anyway. The official line from Siemens is in the link below. http://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csinfo&lang=en&objID=43876783&caller=view
aseame Posts: 1 Rating: (0)	Last edited by: aseame at: 10/6/2010 11:11 AM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on