10/30/2016 2:57 PM | |
Joined: 12/18/2014 Last visit: 9/7/2024 Posts: 33709 Rating:
|
Look at attached screenshots of V2 and V3. AttachmentScreens.zip (338 Downloads) |
This contribution was helpful to
1 thankful Users |
10/30/2016 3:41 PM | |
Posts: 67 Rating:
|
Shift I5 to I1, and it does not work anymore.. Can't figure out whats going on. AttachmentVarmestyring_V2.zip (362 Downloads) |
10/30/2016 4:01 PM | |
Joined: 12/18/2014 Last visit: 9/7/2024 Posts: 33709 Rating:
|
You have the background lighting flags inserted into the program, that is not mine.
All functions okay, I can see any fault. Look at attached ideo. AttachmentTest.zip (332 Downloads) |
Last edited by: ixo65 at: 10/30/2016 4:02:31 PM |
|
10/30/2016 4:20 PM | |
Posts: 67 Rating:
|
Sorry - I have inserted the flags later on.. If I use your program, the background is white without any flag? Doh.. I have figured the mystery out now, regarding I1 and I5.. The display is reading I5, and when i change it to I1, i'll have to change the display setting to. This should work. AttachmentVarmestyring_V3.zip (341 Downloads) |
Last edited by: cs_dk at: 10/30/2016 4:24:23 PM |
|
11/5/2016 10:25 AM | |
Posts: 67 Rating:
|
I've been quite busy, so I did not go any further with this in the previous week. How ever, i have a NO switch as night/day switch - I can easily reverse it by a NOT gate. But that changes my night and day temp. selections as well. (Night changes day temp and vice versa). I can't see where excact the connection is, can you point me in the right direction? EDIT: Day temp seems to work, and starting the heater. Night however does not start the heater, even if 25C is requested. AttachmentVarmestyring_V4_Final.zip (345 Downloads) |
Last edited by: cs_dk at: 11/5/2016 10:31:18 AM |
|
Follow us on