TIA Portal V11SP2 Update5

PDGANGANI

Hello ,

Recently I am using TIA Portal V11 SP2 .

Unfortunatly I am suffering very badly due to unexpected crashes while programming.

Recent days i am not able to open Menu&Toolbar configuration ...

I have created one Thread but cant solve problem.....

After that I have created support request to siemens..

I Got a very accurate reply

Dear Sir ,
Please install Update 5 for WinCC V11 SP2
The same can be downloaded from:-
http://support.automation.siemens.com/WW/view/en/58112582

Now After Updating TIA V11 sp2 to Update-5 ..many of my problems solved.

Menu and Toolbar configuration is working ok.

Software stablity increases a bit.

Hence , As per my experience If you are Using TIA V11 SP2 you should update your software Download Available in above link.

But If it is possible to upgrade TIA V11 to V12 or V13 then you should go for that first.

Thanks for the information sharing... it is always recommended to update the softwares to the latest available Service Packs and updates since most of the found bugs will be cleared with these updates. I have had such issues, which when updated to the latest updates cleared all