Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TIA

Created by: kvermeulen at: 3/28/2012 11:31 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

3/28/2012 11:31 AM	Rate (0)
kvermeulen Advanced Member Joined: 6/24/2011 Last visit: 3/11/2024 Posts: 3 Rating: (0)	Dear I want to integrate an existing S7 project in the TIA portal V11. I think you must do that with de option migration and look for the correct file. When I do that, after 30 sec the program gives me a list with error. You can find it as an attachment. Can somebody help me with this problem? Attachment migrate.JPG (400 Downloads)

Suggestion To thank Quote Answer

3/28/2012 12:18 PM	Rate (0)
TomDeWou Platinum Expert Joined: 11/15/2006 Last visit: 5/7/2021 Posts: 1319 Rating: (173)	The message is: the project is not consistent - but it has to to be migrated. Therefore, open the s7 project in SIMATIC Manager and check block conistency, there compile all once again. Then you need to check your hw configuration why the modules are not migrated, maybe they are outdated. You might also migrate without HW Config, then you will have only the software.
	Have Fun! TomDeWou
Suggestion To thank Quote Answer

3/28/2012 1:11 PM	Rate (0)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 11/6/2024 Posts: 1523 Rating: (229)	TomDeWou The message is: the project is not consistent - but it has to to be migrated. Therefore, open the s7 project in SIMATIC Manager and check block conistency, there compile all once again. Then you need to check your hw configuration why the modules are not migrated, maybe they are outdated. You might also migrate without HW Config, then you will have only the software. Hello kvermeulen, Check this FAQonWhich devices and modules are supported by STEP 7 Professional V11 and WinCC Professional V11?for Hardware Compatibility
	Like it? Rate it!
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on