Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TP070 NOT RESPONSE

Created by: hanani at: 10/7/2008 8:20 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

10/7/2008 8:20 AM	Rate (0)
hanani Posts: 1 Rating: (0)	Hi guys! My TP070 stop response after working for years. during startup i can see thebootup screen (see in the attach file) but the screen not response to my touch .meaning not able to go to transfer or config after 10 seconde the application start but still not response to my finger touch on the screen.eventhe panel still able to communicate with the PLC i tried memory reset but no result. my question what can i do ? is thepanel malfunction ? which software support this panel? is away to reload the operation window ce software? any asist will be appreciat. hanani Attachment tp070.JPG (166 Downloads)
hanani Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

10/7/2008 10:37 AM	Rate (0)
Ayman Elotaify Platinum Expert Joined: 5/28/2008 Last visit: 11/6/2024 Posts: 4516 Rating: (839)	Hi Hanani, Actually the TP070 has been phased out. But first of every thing try to reload the application software on the TP070 using a serial cable. The software that we normally use for programming this screen is "TP designer" Check also the connected cabel and sockets for both ends. Regards,
	Last edited by: Ayman Elotaify at: 10/7/2008 10:38 AM Ayman Elotaify
Suggestion To thank Quote Answer

10/8/2008 9:45 AM	Rate (0)
ZAK Gold Member Joined: 5/8/2006 Last visit: 10/16/2024 Posts: 1085 Rating: (77)	Hi, maybe the panel is damaged. If you want to repair the panel you can contact the local serviceand supportpartner in your region. More information in the following link: http://support.automation.siemens.com/WW/view/de/22639376 Bye

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on