Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Upload Program from Device in TIA v13

Created by: Sathish Kumar Karuppiah at: 3/18/2015 5:16 AM (5 Replies)

Rating (1)

Thanks 4

6 Entries

3/18/2015 5:16 AM	Rate (0)
Sathish Kumar Kar... Experienced Member Joined: 7/24/2013 Last visit: 8/29/2022 Posts: 68 Rating: (0)	Hello Everyone, Now i have to upload the program from a S7 1200 cpu which was created in earlier versions of TIA Portal...Now I am Having TIA v13 Basic..What is the procedure to upload the Program?... Thanks in Advance!!!!!!!!!!!!!!

Suggestion To thank Quote Answer

3/18/2015 5:41 AM	Rate (0)
Josh Elliott Posts: 204 Rating: (29)	Hi, Can you provide which version of TIA Portal used to program s7-1200,because if it programmed in earlier versions like v10.5,v11,v12 ....you cannot upload in TIA V13,the only upload option is available for the TIA v12SP1......
Josh Elliott Posts: 204 Rating: (29)
Suggestion To thank Quote Answer

3/18/2015 6:20 AM	Rate (1)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 10/4/2023 Posts: 21763 Rating: (2903)	Hi, here you find a overwiev for Uploading and here a detailed description how to perform the Upload @Josh: in Link 1 you see a upload is not only possible if you load with V12.SP1 Regards Christoph

Suggestion To thank Quote Answer
This contribution was helpful to 3 thankful Users BWayne Allen2 JeremiahUSA

3/18/2015 6:29 AM	Rate (0)
Josh Elliott Posts: 204 Rating: (29)	Hi, Sorry ChristopD i didnt get it what you're saying.
Josh Elliott Posts: 204 Rating: (29)
Suggestion To thank Quote Answer

3/18/2015 6:51 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 10/4/2023 Posts: 13764 Rating: (2246)	Your V13 license allows you to install V12. I suggest you do that. For V11 projects, next you open up a "test" V11 project (check the FAQs for the sample project), and follow that FAQs directions. For V12 projects, then just open up V12 and upload. For V12 SP1, make sure your V12 is updated with V12 SP1 and latest update. This subject has been covered multiple times in these forums. If you cannot find it on this site, that is sadly understandable because so many things go shuffled around when they recently upgraded the forums and support site. Sathish Kumar Karuppiah Hello Everyone, Now i have to upload the program from a S7 1200 cpu which was created in earlier versions of TIA Portal...Now I am Having TIA v13 Basic..What is the procedure to upload the Program?... Thanks in Advance!!!!!!!!!!!!!!
	science guy
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Sathish Kumar Kar...

10/13/2016 10:03 AM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4792 Rating: (123)	New question published by Xurshid is split to a separate thread with the subjectUpload TIA V12. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on