Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

use of first slot

Created by: RAJKIRAN at: 2/18/2012 12:12 PM (4 Replies)

Rating (0)

Thanks 2

5 Entries

2/18/2012 12:12 PM	Rate (0)
RAJKIRAN Silver Member Joined: 8/18/2009 Last visit: 6/17/2024 Posts: 548 Rating: (33)	Dear Expert, what is use of first slot in IM Rack. find attached doc. with this post Attachment Doc.JPG (123 Downloads)
	Rajkiran Patil
Suggestion To thank Quote Answer

2/18/2012 3:25 PM	Rate (0)
Jazz_M Gold Member Joined: 9/6/2008 Last visit: 5/7/2022 Posts: 1121 Rating: (86)	Hi Well as of i know, PLC configuration is as follows 1. Power Supply 2. CPU 3. CP 4.IM 5. IO cards the slot left in the Et200M IO is for Power Supply i think, Please see the attachement, You can have a further help from Help manuals, in "Basic procedure for Configuration of Hardware" Have fun... Attachment Slot.JPG (108 Downloads)
	Last edited by: Tagolover at: 2/18/2012 3:25 PM Jazz
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users RAJKIRAN

2/20/2012 10:39 AM	Rate (0)
Jeebs Posts: 218 Rating: (28)	Hi, As you can see in the picture posted by Tagolover, the first slot is reserved for PowerSupply modules. Both in the main rack and expansion racks. So to answer your question: Slot 1 is reserved for PowerSupply.
Jeebs Posts: 218 Rating: (28)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users RAJKIRAN

2/20/2012 11:30 AM	Rate (0)
RAJKIRAN Silver Member Joined: 8/18/2009 Last visit: 6/17/2024 Posts: 548 Rating: (33)	Thanks Tagolover & Jeebs, but if we take external power supply then there is no need of power supply in Expansion rack. is it economical option that we take external pwer supply instead of take special Power supply in Expansion rack?....
	Rajkiran Patil
Suggestion To thank Quote Answer

2/20/2012 11:38 AM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 10/17/2024 Posts: 5697 Rating: (715)	Hello, There is no need to insert a powersupply in the S7-300 rack, that's because there is no communication over the bus like with 400 systems. So you are free to use any power supply you like. I think the only reason for being able to insert a power supply is for documentation. You can then print out all the components used in the system, including the PS. Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on