Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Using an inductive sensor 24V with 1Count24V/100kHz module

Created by: aag_03 at: 11/14/2012 3:55 PM (1 Replies)

Rating (0)

Thanks 1

2 Entries

11/14/2012 3:55 PM	Rate (0)
aag_03 Posts: 84 Rating: (2)	Hello, dear experts! Can I connect an inductive sensor 24V to the 1Count24V/100kHz module (6ES7 138-4DA04-0AB0) instead of pulse encoder or incremental encoder? Thanks for any reply. Best regards, Alexander.
aag_03 Posts: 84 Rating: (2)
Suggestion To thank Quote Answer

11/14/2012 5:05 PM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 10/17/2024 Posts: 5697 Rating: (715)	Hello, If that sensor is fast enough to catch your pulses, yes. you can read more about your module here; SIMATIC ET 200S Technological Functions Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users aag_03

|

Share this page:

Share this page on...

Follow us on