Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Using PGM6 for old software

Created by: afri.aj at: 8/26/2024 2:01 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

8/26/2024 2:01 PM	Rate (0)
afri.aj Advanced Member Joined: 4/2/2019 Last visit: 10/7/2024 Posts: 15 Rating: (0)	Dear All, I was using an old laptop that had the following software installed: 1. WinCC Flexible 2008 Advanced 2. STEP 7 Professional Edition 2006 Unfortunately, the laptop has crashed and is unrecoverable. I am considering purchasing a Siemens PGM6 as a replacement. Could you please confirm if this model will support my existing licenses? I would prefer not to upgrade them at this time. Thank you in advance. afri.aj

Suggestion To thank Quote Answer

8/26/2024 3:36 PM	Rate (0)
Havillant Comet Silver Member Joined: 8/6/2018 Last visit: 10/3/2024 Posts: 291 Rating: (40)	Hello, It depends on the operating system version. What version of the operating system are you using? Thanks you

Suggestion To thank Quote Answer

8/26/2024 8:07 PM	Rate (0)
afri.aj Advanced Member Joined: 4/2/2019 Last visit: 10/7/2024 Posts: 15 Rating: (0)	It is running Windows 11 Pro. If it is so, I guess I'll have to check compatibility for the software right? Is it possible to get PGM6 without any software & licences? Like a customised one.

Suggestion To thank Quote Answer

8/27/2024 7:49 PM	Rate (0)
Havillant Comet Silver Member Joined: 8/6/2018 Last visit: 10/3/2024 Posts: 291 Rating: (40)	You can use the following tool to check compatibility https://support.industry.siemens.com/cs/ww/fr/view/64847781/en Yes, I think you can buy the PG without the operating system. Thansk you

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on