Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Want to upload the program from my KTP700 Basic HMI with TIA portal

Created by: ASHASIAN at: 3/16/2020 1:23 PM (2 Replies)

Rating (0)

Thanks 1

3 Entries

3/16/2020 1:23 PM	Rate (0)
ASHASIAN Posts: 1 Rating: (0)	Hello Sir, I want to upload the program from my KTP700 Basic HMI with TIA portal can you please explain step by step. Regards Ashwani ------------------------------------------------------------------------------------------ Split from Problem to Upload program from hmi in tia v13.
ASHASIAN Posts: 1 Rating: (0)	Last edited by: Jen_Moderator at: 03/17/2020 06:43:12 New subject after splitting
Suggestion To thank Quote Answer

3/17/2020 2:43 AM	Rate (0)
Prof. Frink Platinum Expert Joined: 7/5/2013 Last visit: 11/11/2024 Posts: 3119 Rating: (515)	Hello Ashwani, ASHASIAN Hello Sir, I want to upload the program from my KTP700 Basic HMI with TIA portal can you please explain step by step. Regards Ashwani you cannot load the editable program from the HMI. You only can create a backup of the compiled program, e.g. on the HMI itself (function in Control Panel of HMI). Regards, Frink
	Pi is exactly three! All you have to do is think of things which people need but which don’t exist yet.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Murof

3/26/2020 1:49 PM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 11/11/2024 Posts: 14143 Rating: (1771)	Hello ASHASIAN What do you mean with "Upload from ...." this makes no sence for me. You can download a project to a Panel. -> LINK The other Way (This would be download the projecr from the panel) is not possible as already mentioned. the Backtransfer option is not available in TIA Portal Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on