Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

What kind of scaling is to be entered at the input driver?

Created by: Ralphraue1978 at: 5/11/2021 10:25 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

5/11/2021 10:25 AM	Rate (0)
Ralphraue1978 Member Joined: 8/14/2014 Last visit: 7/6/2022 Posts: 1 Rating: (0)	Hello Siwarexi, we just have the problem which scaling has to be configured on the PCS7 input driver. We have a scale with 4 load cells of 500 kg each. Now we have set the limits for the analogue output to 0 (start value) and 2000 (end value) in the Siwatool. We currently get a value (raw value) of 16#EDA = 3.802 decimal. What kind of scaling is to be entered at the input driver? With an activation of 0-2000 at the input driver, we get a value of 276 kg. In reality, the scale net value is 107 kg. I would be very pleased to receive support at short notice. Greetings, Ralph. ------------------------------------------------------------------------------------------ Split from How to configure WP231 for analog output by siwatool V7?.
	Last edited by: Ralphraue1978 at: 05/11/2021 10:43:41 Last edited by: Jen_Moderator at: 05/11/2021 13:09:16 New subject after splitting
Suggestion To thank Quote Answer

5/11/2021 1:20 PM	Rate (0)
Siwarexi Gold Expert Joined: 1/4/2007 Last visit: 12/17/2024 Posts: 1166 Rating: (175)	Hello Ralphraue1978, When you have the Siwatool-software: Can you go online with the Siwatool software to the Siwarex module => Receive all date => store the parameter settings into a Siwatool-file => Post your Siwatool-file in this thread. I would like to take a look into your Siwatool-file. Best regards Siwarexi

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on