Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

When the limit is reached...

Created by: JARomo at: 4/13/2012 7:40 PM (5 Replies)

Rating (0)

Thanks 0

6 Entries

4/13/2012 7:40 PM	Rate (0)
JARomo Posts: 6 Rating: (0)	Hey everyone! I'm facing an issue... I'm doing a quite large KOPprogram in logo! softcomfortV6.1.16and I got the following dialog: "The maximum number of blocks has been reached" I can't place anything else nor wire upany other blocks within the program. What can I do (besides optimization)? My final device is a Logo! 12/24 RC (6AG1 052-1MD00-2BA6) Thanks in advance!
JARomo Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

4/13/2012 7:53 PM	Rate (0)
otter Gold Member Joined: 9/30/2005 Last visit: 12/24/2024 Posts: 42 Rating: (13)	Hello, You can optimize your programm, or use the LOGO 0BA7. In the new LOGO you have 400 blocks! Succes

Suggestion To thank Quote Answer

4/13/2012 7:54 PM	Rate (0)
JARomo Posts: 6 Rating: (0)	Hello and thanks for the reply! How many blocks do I have in my current logo?
JARomo Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

4/13/2012 8:11 PM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 12/13/2024 Posts: 5697 Rating: (715)	Hello, 0BA6 Logo has 200 Blocks, You can check that by yourself in Logosoft. Press CTRL-H or in tools, select hardware, choose the version you have and see what are the specs off your Logo. If you attach your creation here, i'm pretty sure we can optimize the program to lose some blocks. But it's better to try by yourself first. Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

4/16/2012 3:20 PM	Rate (0)
JARomo Posts: 6 Rating: (0)	Isn't there a way to simply plug a memory card to expand the number of available blocks or something like that? just asking... Meanwhile I'll try to get rid of some irrelevant stuff at my code. If I can't I'll let you know, if you don't mind Thanks a lot!
JARomo Posts: 6 Rating: (0)	Last edited by: JARomo at: 4/16/2012 3:22 PM
Suggestion To thank Quote Answer

4/16/2012 3:27 PM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 12/13/2024 Posts: 5697 Rating: (715)	Hello, No way to expand the memory, sorry. There are memory modules but they are for ditribution off the program only. Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on