Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

while key pressed

Created by: saseryu at: 8/8/2012 5:13 PM (20 Replies)

Rating (0)

Thanks 2

Result pages:: |; 1 | 2 | 3; |

21 Entries

Entries per page: 10 | 20 | all

8/8/2012 5:13 PM	Rate (0)
saseryu Experienced Member Joined: 5/17/2007 Last visit: 9/4/2024 Posts: 39 Rating: (0)	Hi, i want to start fwd or rev to motL while i pressing the fwd or rev button in manual mode, in automatic mode there is no problem. is this possible in standart faceplate? or i should add another buttons to do this. Best regards,

Suggestion To thank Quote Answer

8/9/2012 2:32 PM	Rate (0)
hary1987 Posts: 2 Rating: (0)	hi saseryu; u can better use motrev block instead of motl.try and if solved add thankx button.
hary1987 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

8/9/2012 5:37 PM	Rate (0)
saseryu Experienced Member Joined: 5/17/2007 Last visit: 9/4/2024 Posts: 39 Rating: (0)	hi, the problem is not motl or motrev block, the problem is while i pressing the start (or fwd or rev)button the motor should run otherwise the motor should stop. no matter which block you used.

Suggestion To thank Quote Answer

8/9/2012 6:01 PM	Rate (0)
TerminalBuzz Silver Member Joined: 11/4/2011 Last visit: 8/25/2024 Posts: 253 Rating: (53)	I'm afraid it's not possible saseryu, would you modify the standard faceplate then?

Suggestion To thank Quote Answer

8/9/2012 8:14 PM	Rate (0)
saseryu Experienced Member Joined: 5/17/2007 Last visit: 9/4/2024 Posts: 39 Rating: (0)	Hi TerminalBuzz, i think that add butons on screen and then set the related tag on pres buton and reset the tag on release the button. Can i do this on standart faceplate? Best Regards

Suggestion To thank Quote Answer

8/10/2012 8:39 AM	Rate (0)
TerminalBuzz Silver Member Joined: 11/4/2011 Last visit: 8/25/2024 Posts: 253 Rating: (53)	I would advise you to make a copy of @PG_APL_OA_Binary103.pdl and to work with it with a new name. Then open @PG_MotL_Standard.pdl and select the button csoBtnCommand. Change Links\OpAreaPicture from @pg_apl_oa_binary103.pdl to that new_name.pdl. And now study the Scripts of a Mouse Event, disable OK buttons, also maybe you should add a new Event (in a Configuration Dialog).. I can't tell you more information cause I didn't try to do this task and haven't time for that.. :( But I'm shure that I would have to do it, later.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users saseryu

8/10/2012 2:33 PM	Rate (0)
saseryu Experienced Member Joined: 5/17/2007 Last visit: 9/4/2024 Posts: 39 Rating: (0)	hi TerminaBuzz, i like your solution and i am trying but i also make a copy to @PG_MotSpdL_Standard a new name that "picturex" and now i should when i click the block icon picturex faceplate open but i cannot , how can i link the related picture. on press left C script APL_OpenFaceplate(lpszPictureName, lpszObjectName,0, NULL, NULL ); to open the @PG_MotSpdL_Standard picture but how to can i link to picturex??
	Last edited by: saseryu at: 8/10/2012 2:36 PM
Suggestion To thank Quote Answer

8/10/2012 3:18 PM	Rate (0)
TerminalBuzz Silver Member Joined: 11/4/2011 Last visit: 8/25/2024 Posts: 253 Rating: (53)	It's not that easy. First of all tell us what is that new name for the Standard view. All the pdls for the views should be named as: _{@PG_MotSpdL.PDL @PG_MotSpdL_Limit.PDL @PG_MotSpdL_Overview.PDL @PG_MotSpdL_Parameter.PDL @PG_MotSpdL_Preview.PDL @PG_MotSpdL_Standard.PDL @PG_MotSpdL_ViewToolbar.PDL} And don't even try to rename something. Many scripts are using these special names so you would get lost while searching for all the places were you must put changes. If you want a separate pdl for some view (e.g. @PG_MotSpdL_NewStandard.PDL) you'd better create your own FB like MotSpd2 with the IOs like in MotSpdL and call the MotSpdL block in yours. Connect your IOs to ModSpdL's. Then copy all the view-pdls. You would get: _{@PG_MotSpd2.PDL @PG_MotSpd2_Limit.PDL @PG_MotSpd2_Overview.PDL @PG_MotSpd2_Parameter.PDL @PG_MotSpd2_Preview.PDL @PG_MotSpd2_Standard.PDL @PG_MotSpd2_ViewToolbar.PDL} And don't forget about Block Icon. That's not all, but I believe that this way is easier and safer than changing scripts.

Suggestion To thank Quote Answer

8/10/2012 3:43 PM	Rate (0)
saseryu Experienced Member Joined: 5/17/2007 Last visit: 9/4/2024 Posts: 39 Rating: (0)	so easy so i give up and return to my first solution and add 2 button on related screen Thanks

Suggestion To thank Quote Answer

8/10/2012 4:28 PM	Rate (0)
TerminalBuzz Silver Member Joined: 11/4/2011 Last visit: 8/25/2024 Posts: 253 Rating: (53)	What is that related screen's name? Remember that Control buttons are located at @PG_APL_OA_Binary103.PDL and this screen is also used by different units (Motors, Valves..) Do you now how to hide your additional buttons for all the other units?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on