WINCC FLEXIBLE 2008 Y PANEL HMI TP177B DP

ing-LM

Buenos. Tengo un proyecto Wincc de un panel TP177B DP mono el cual fue creado en verision Wincc flexible 2007. el panel se daño y lo estoy reemplazando por un panel modelo TP177B color DP/NP para lo cual estoy usando Wincc flexible 2008 SP3 que tengo instalado, al abrirlo me dice para actualizar la versión y la abre perfectamente modifico el tipo de panel, establezco la comunicación vía ethernet o MPI con el panel y le descargo el proyecto sin problemas. pero al momento de conectar el panel en la maquina a un S7_300 CPU 317 2-DP este no se comunica. he verificad la dirección profibus y la configuración del puerto MPI/DP y esta too bien pero sin embargo no se establece la comunicaron. si alguno puede ayudarme al respecto con esta falla agradecido...

 Dear ing-LM,

This forum have two parts one (this) is in English Language other is in German Language, next time please explain your problem in English.

Google translation from Spanish:

Good ones. I have a WinCC project from a mono TP177B DP panel which was created in version WinCC flexible 2007. The panel is damaged and I am replacing it with a panel TP177B color DP / PN for which I am using WinCC flexible 2008 SP3 that I have installed, When opening it tells me to update the version and open it perfectly modify the panel type, I establish the communication via ethernet or MPI with the panel and I release the project with no problems. But at the moment of connecting the panel in the machine to a S7_300 CPU 317 2-DP this one does not communicate. I have verified the profibus address and MPI / DP port configuration and this is fine but however it is not established the communicated. If anyone can help me with this grateful fault ...

With which port is your communication? Profibus? Have you already enabled DP port on the panel?

 Translation from the Spanish text:

ing-LM

Hello;

I have a TP177B DP mono project which was created with WinCC Flexible 2007. The panel was damaged and I am replacing it with a TP177B DP/PN colour, using WinCC Flexible 2008 SP3, which I have installed.

When opening the archive it asks me to update the program and opens it perfectly; I change the panel model, setup communications over Ethernet or MPI with the panel; I download the program to the panel without problems, but when I connect the panel to the mavhine with a CPU 317-2DP they do not communicate together.

I verified the Profibus address and the configuration of the MPI/DP port and all is correct; but communications cannot be established. If anyone can help me with this problem I would really appreciate it...

 Hola Ing-LM;

En este foro de Siemens usamos el ingles como idioma internacional. Muchos aqui no entienden el espanol, venemos de nuchos paises con muchas lenguas nacionales. Con el ingles muchos mas puden entender y contester a las preguntas en el foro.

Por favor, trata de traducer las proximas preguntas en Ingles en el foro.

Bueno, para tu pregunta: seria posible mandarnos una captura de pantalla de tus parametros de comunicacion del nuevo programa (WinCC Flexible 2008 SP3) para ver si podemos encontrar la causa de tu problema?

Hello Ing-LM;

In the Siemens forum we use English as an international language. Many here do not speak Spanish, we re from many countries with different national languages. With English many more can understand and reply to your questions on the forum.

Please try to use English in your next questions on the forum.

Now, for your request: would it be possible to send us a screencapture of your communication parameters, from your updated program (in WinCC 2008 SP3); we might be able to detect the source of your problem?

Hope this helps,

Daniel Chartier

New question published by nadeem ahmed is split to a separate thread with the subject Program is not downloading in TP177B.

Best regards
Jen_Moderator