Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinCC RT 2007 running under 2005 Activation

Created by: RajSHJ at: 2/22/2008 8:23 AM (2 Replies)

Rating (1)

Thanks 0

3 Entries

2/22/2008 8:23 AM	Rate (0)
RajSHJ Posts: 41 Rating: (1)	Request help from experienced programmers: I have created a project in WinnCC Flex Advanced 2007. The PC in which the application runs is installed witha licence key for WinCC RT 2005 (128Tags). 1) When I compile the project, it says the number of power tags used as 105 (well within the allowed 128 tags) 2) When it runs under the above licence, a message appears intermittantly saying that "Too many power tags has beenconfigured : 500 powertags. When the button "Noted" is pressed,the message box disappears and reappears after a few minutes. The application runs well. 3) How the number of power tags are counted? Why it shows as "Too many (500)" when it is only 105 while compiling? Please help me RajSHJ
RajSHJ Posts: 41 Rating: (1)
Suggestion To thank Quote Answer

2/25/2008 9:17 AM	Rate (1)
The Brain Gold Member Joined: 10/19/2005 Last visit: 11/30/2020 Posts: 1611 Rating: (119)	Hi, if you using flexible 2007 then you need a license for 2007! (A license for 2005 works, but you will get the messages) -> You can upgrade from 2005 -> 2007 > Look to the following FAQ -> http://support.automation.siemens.com/WW/view/en/26169252and under point 2. regards,

Suggestion To thank Quote Answer

3/3/2008 4:20 PM	Rate (0)
RajSHJ Posts: 41 Rating: (1)	The Brain, Thank you very much for the info Regards
RajSHJ Posts: 41 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on