Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Write a word value in a DB

Created by: Nikolas.hb at: 1/5/2011 1:28 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

1/5/2011 1:28 PM	Rate (0)
Nikolas.hb Posts: 2 Rating: (0)	Hey guys, I'm developing a HMI that already have 1800 tags. I need to reduce this to less then 1500. I have struct into a DB wich is onlywith bool commands and I need to compact this struct to save tags in HMI.What I wanna know is if I can transfer a value wrote in a word memory at the CLP to a struct in my DB. With this, I could write in my word by HMI and transfer the status to the current DB. Is this possible? I also tried to declare all the DB.DBW and access DB.DBX0.0, but it is not possible because of the software of the HMI. thanks all nikolas
Nikolas.hb Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

1/5/2011 1:58 PM	Rate (0)
Wüstenräuber Gold Member Joined: 10/3/2008 Last visit: 9/20/2023 Posts: 946 Rating: (122)	Hi Nikolas, do you use WinCC? Wüstenräuber

Suggestion To thank Quote Answer

1/5/2011 2:01 PM	Rate (0)
Nikolas.hb Posts: 2 Rating: (0)	Hi Wüstenräuber I'm using another scada software (elipse e3) nikolas
Nikolas.hb Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on