Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Siemens PLC to Other PLC Communication on Ethernet

Created by: CSI-Group at: 7/17/2006 2:20 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

7/17/2006 2:20 PM	Rate (0)
CSI-Group Posts: 17 Rating: (0)	Hi, How to establish Ethernet communication between Siemens PLC and Non Siemens PLC (AB/Mitsubishi etc.) Regards
CSI-Group Posts: 17 Rating: (0)
Suggestion To thank Quote Answer

7/17/2006 5:15 PM	Rate (0)
Denilson Pegaia Platinum Member Joined: 9/23/2005 Last visit: 11/14/2024 Posts: 4352 Rating: (1452)	Hi, S7-300/400 has avaliable the follow "open protocolls": 1 - PROFINET CBA 2 - PROFINET IO 3 - TCP/IP 4 - UDP
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

7/18/2006 1:13 PM	Rate (0)
CSI-Group Posts: 17 Rating: (0)	Thank You, Denilson, Is it possible for you to provide any example project for Siemensto ABB and Siemensto AB? Thanking You, With Best Regards, CSI Group
CSI-Group Posts: 17 Rating: (0)
Suggestion To thank Quote Answer

7/19/2006 12:13 AM	Rate (0)
Late Platinum Expert Joined: 1/7/2006 Last visit: 11/17/2023 Posts: 2705 Rating: (318)	Hi, Only TCP/IP and UDP could be used for the other ones. For the AB you may possibly also use Open Modbus TCP/IP. Examples i have never seen but you have to search how to do it on the other side, the S7 side have a lot of examples. ABB-communication is most of the time propiarity, so ABB will only communicate with Ethernet and Profibus.
	I hope that the answer will help, if you have still questions, don't hesitate to ask me. All the best, Late Never say never, think in solutions, not in trouble......
Suggestion To thank Quote Answer

7/24/2006 4:44 AM	Rate (0)
Dec Gold Expert Joined: 5/19/2006 Last visit: 10/23/2024 Posts: 549 Rating: (107)	I would consider in this case some gateway options available (see Woodhead / applicom® GATEway - Industrial Multi Protocol Gateway for example) Dec
	Last edited by: Dec at: 7/24/2006 4:50 AM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on