Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinCC RT + S71200

Created by: SSJV at: 5/24/2012 8:25 AM (25 Replies)

Rating (1)

Thanks 1

Result pages:: |; 1 | 2 | 3; |

26 Entries

Entries per page: 10 | 20 | all

5/24/2012 8:25 AM	Rate (0)
SSJV Posts: 19 Rating: (0)	hi everyone... i have Problems reading/writing tags from plc in RT Advance and RT professional. im using TIA Portal V11 SP2 + WinCC Professional V11 SP2 + S7-1214C V1.0 i will attach 2 pictures. thx and best regards Attachment 1.jpg (709 Downloads)
SSJV Posts: 19 Rating: (0)
Suggestion To thank Quote Answer

5/24/2012 8:30 AM	Rate (0)
SSJV Posts: 19 Rating: (0)	Picture 2 Attachment 2.jpg (675 Downloads)
SSJV Posts: 19 Rating: (0)
Suggestion To thank Quote Answer

5/24/2012 8:39 AM	Rate (0)
playerslight Posts: 1064 Rating: (72)	I may be incorrect but the tag is showing as internal and not connected to plc ,is this what you wanted or to change something in the plc ?
playerslight Posts: 1064 Rating: (72)
Suggestion To thank Quote Answer

5/24/2012 8:48 AM	Rate (0)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 11/6/2024 Posts: 1523 Rating: (229)	playerslight I may be incorrect but the tag is showing as internal and not connected to plc ,is this what you wanted or to change something in the plc ? Hello playerslight, If you can see there is a address also defined with %M0.0 (which is not possible if it is a internal tag) and also mentioned as Internal Tag which is highlighted in red. Hello SSJV, Can you please provide the screenshot of the connections window from your WinCC RT Advanced. If you have created a HMI connection already, you have to choose the right connection in place of the RED highlighted Internal tag area. Then it should work fine.
	Like it? Rate it!
Suggestion To thank Quote Answer

5/24/2012 10:05 AM	Rate (0)
SSJV Posts: 19 Rating: (0)	ok 3 pictures for you... i cannot connect to the plc using RT Advance or Professional, i was able to do it with a ktp1000 Basic PN. Attachment 3.jpg (652 Downloads)
SSJV Posts: 19 Rating: (0)
Suggestion To thank Quote Answer

5/24/2012 10:06 AM	Rate (0)
SSJV Posts: 19 Rating: (0)	Picture 4 Attachment 4.jpg (624 Downloads)
SSJV Posts: 19 Rating: (0)
Suggestion To thank Quote Answer

5/24/2012 10:09 AM	Rate (0)
SSJV Posts: 19 Rating: (0)	PLC IP 192.168.0.1 PC Station IP 192.168.0.5 same as my desktop pc with TIA + WinCC installed Attachment 5.jpg (597 Downloads)
SSJV Posts: 19 Rating: (0)
Suggestion To thank Quote Answer

5/24/2012 10:28 AM	Rate (0)
playerslight Posts: 1064 Rating: (72)	Ganes10 playerslight I may be incorrect but the tag is showing as internal and not connected to plc ,is this what you wanted or to change something in the plc ? Hello playerslight, If you can see there is a address also defined with %M0.0 (which is not possible if it is a internal tag) and also mentioned as Internal Tag which is highlighted in red. quote] Sorry I missed that didn't mean to miss lead you
playerslight Posts: 1064 Rating: (72)	Last edited by: playerslight at: 5/24/2012 10:28 AM
Suggestion To thank Quote Answer

5/24/2012 10:58 AM	Rate (0)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 11/6/2024 Posts: 1523 Rating: (229)	playerslight Sorry I missed that didn't mean to miss lead you Hello playerslight, It's OK. I didn't mean it inoffensive way. I added my observation to your's. I also read the first line which you wrote.
	Like it? Rate it!
Suggestion To thank Quote Answer

5/24/2012 11:01 AM	Rate (0)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 11/6/2024 Posts: 1523 Rating: (229)	SSJV ok 3 pictures for you... i cannot connect to the plc using RT Advance or Professional, i was able to do it with a ktp1000 Basic PN. Can you please provide some screensholt similar to this from your project. and like this
	Like it? Rate it!
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Communication

Follow us on