Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Troubleshooting 6SN1145-1BA02-0CA0 INT .36/47Kw E/R Modul

Created by: hrhoward at: 3/11/2010 8:59 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

3/11/2010 8:59 PM	Rate (0)
hrhoward Posts: 7 Rating: (0)	Hello, I have a 6SN1145-1BA02-0CA0 INT .36/47Kw E/R Modul that I need to troubleshoot. Does any one know the steps for this procedure?
hrhoward Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

3/12/2010 2:46 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hi... what is the indication on the I/R module?LED status have you observed any burnt out smell in the module.......if you have observed bettter send it for repairs. With Regards rpk89
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

3/12/2010 3:14 PM	Rate (0)
hrhoward Posts: 7 Rating: (0)	rpk89, Green Led. When the enable signal is sent, all led's go off. No burnt smell. I would like to know how to check it out by removing all external signals.
hrhoward Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

3/13/2010 6:04 AM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	hello... check this out... regards, rpk89 Attachment Checking procedure of IR-FDD-Profibus.pdf (752 Downloads)
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

7/30/2014 2:40 PM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 8/20/2024 Posts: 2682 Rating: (135)	New question was split to Alarm "servodrive is in fault". Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on